Netgear FVS336G-300NAS Dokumentacja Pobierz pdf (Strona 188)

100

101

Configure the IPv6 LAN Settings

188

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3

8. Enter the settings as described in the following table.

Setting Description

DMZ Port Setup

Select the Yes radio button to configure the DMZ port settings. Complete the following fields:

• IPv6 Address. Enter the IP address of the DMZ port. Make sure that the DMZ port IP address, LAN

port IP address, and WAN port IP address are in different subnets. The default IP address for the

DMZ port is fdff::1.

• Prefix Length. Enter the IPv6 prefix length, for example, 10 or 64. The default prefix length for the

DMZ port is 64.

Note: By default, the DMZ port is disabled. After you configure the DMZ port, you can select the No radio

button to disable the DMZ port without losing the DMZ configuration.

DHCPv6 for DMZ Connected Computers

DHCP Status Enable the DHCPv6 server by selecting Enable DHCPv6 Server from the

DHCP Status menu.

The default menu selection is Disable DHCPv6 Server.

DHCP Mode From the DHCP Mode menu, select Stateless.

The IPv6 clients generate their own IP address by using a combination of

locally available information and router advertisements but receive DNS server

information from the DHCPv6 server.

For stateless DHCPv6, you must configure the RADVD and advertisement

prefixes (see Manage the IPv6 Router Advertisement Daemon for the DMZ on

page 189).

Domain Name Enter the domain name of the DHCP server.

Server Preference Enter the DHCP server preference value. The possible values are 0–255, with

255 as the default setting.

This is an optional setting that specifies the server’s preference value in a

server advertise message. The client selects the server with the highest

preference value as the preferred server.

1 2 ... 183 184 185 186 187 188 189 190 191 192 193 ... 692 693

Komentarze do niniejszej Instrukcji

Brak uwag

Netgear FVS336G-300NAS Dokumentacja Strona 188

Komentarze do niniejszej Instrukcji