Netgear GS748TS Instrukcja Użytkownika Strona 155

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
Przeglądanie stron 154
GS700TS Smart Switch Software Administration Manual
Configuring QoS 5-6
v1.0, June 2009
2. Select either Strict Priority or WRR to specify the traffic scheduling method.
3. Click APPLY to update the device.
Bandwidth
After packets are assigned to a queue, a scheduling scheme can be assigned to an interface, using
either:
Committed Burst Size – Indicates the maximum number of data bits transmitted within a
specific time interval.
Committed Information Rate – Indicates the rate that data is transmitted. The rate is
averaged over a minimum time increment.
The Bandwidth screen allows the network manager to define Ingress Rate Limit and Egress
Shaping Rates.
To define bandwidth settings:
1. Click QoS > CoS > Basic > Bandwidth. The Bandwidth screen displays:
The Bandwidth screen contains the following fields:
Interface – Displays the ports for which the bandwidth settings are displayed.
Ingress Rate Limit Status – Select whether rate limiting is defined on the interface. The
possible field values are:
Enable – Enables ingress rate limiting on the interface.
Figure 5-4
Przeglądanie stron 154
1 2 ... 150 151 152 153 154 155 156 157 158 159 160 ... 231 232

Komentarze do niniejszej Instrukcji

Brak uwag