Netgear Switch M4100-12G-POE+ Instrukcja Użytkownika

350 East Plumeria DriveSan Jose, CA 95134USAFebruary 2013202-11166-021.0ProSafe Managed SwitchCommand Line Interface (CLI) User Manual10.0.1M7100-24XM

Using the Command-Line Interface10ProSafe M4100 and M7100 Managed Switches The parameters for a command might include mandatory values, optional value

Switching Commands100ProSafe M4100 and M7100 Managed Switches no storm-control multicast levelThis command sets the multicast storm recovery threshold

Switching Commands101 ProSafe M4100 and M7100 Managed Switchesno storm-control unicastThis command disables unicast storm recovery mode for an interfa

Switching Commands102ProSafe M4100 and M7100 Managed Switches no storm-control unicast rateThis command sets the unicast storm recovery threshold to t

Switching Commands103 ProSafe M4100 and M7100 Managed Switchesno storm-control unicast levelThis command sets the unicast storm recovery threshold to

Switching Commands104ProSafe M4100 and M7100 Managed Switches Use the all keyword to display the per-port configuration parameters for all interfaces,

Switching Commands105 ProSafe M4100 and M7100 Managed Switchesno flowcontrol Format no flowcontrolMode• Global Config• Interface Configshow flowcontro

Switching Commands106ProSafe M4100 and M7100 Managed Switches A port-channel (LAG) interface can be either static or dynamic, but not both. All member

Switching Commands107 ProSafe M4100 and M7100 Managed Switcheslacp admin keyUse this command to configure the administrative value of the key for the

Switching Commands108ProSafe M4100 and M7100 Managed Switches lacp actor admin keyUse this command to configure the administrative value of the LACP a

Switching Commands109 ProSafe M4100 and M7100 Managed SwitchesNote: This command is only applicable to physical interfaces.no lacp actor admin state

Using the Command-Line Interface11 ProSafe M4100 and M7100 Managed SwitchesSlot/Port Naming ConventionManaged switch software references physical enti

Switching Commands110ProSafe M4100 and M7100 Managed Switches no lacp actor port priorityUse this command to configure the default priority value assi

Switching Commands111 ProSafe M4100 and M7100 Managed Switchesno lacp partner admin keyUse this command to configure the administrative value of the K

Switching Commands112ProSafe M4100 and M7100 Managed Switches lacp partner admin state passiveUse this command to set the LACP partner admin state to

Switching Commands113 ProSafe M4100 and M7100 Managed SwitchesNote: This command is only applicable to physical interfaces.no lacp partner port prior

Switching Commands114ProSafe M4100 and M7100 Managed Switches Note: This command is applicable only to physical interfaces.no lacp partner system pri

Switching Commands115 ProSafe M4100 and M7100 Managed Switchesno port-channel staticThis command sets the static mode on a particular port-channel (LA

Switching Commands116ProSafe M4100 and M7100 Managed Switches no port lacptimeoutThis command sets the timeout back to its default value on a physical

Switching Commands117 ProSafe M4100 and M7100 Managed Switchesport-channel linktrapThis command enables link trap notifications for the port-channel (

1234567<slot/port>| allSwitching Commands118ProSafe M4100 and M7100 Managed Switches no port-channel load-balanceThis command reverts to the def

Switching Commands119 ProSafe M4100 and M7100 Managed Switchesno port-channel system priorityUse this command to configure the default port-channel sy

Using the Command-Line Interface12ProSafe M4100 and M7100 Managed Switches Note: In the CLI, loopback and tunnel interfaces do not use the slot/port

Switching Commands120ProSafe M4100 and M7100 Managed Switches show port-channel briefThis command displays the static capability of all port-channel (

Switching Commands121 ProSafe M4100 and M7100 Managed Switchesshow port-channel system priorityUse this command to display the port-channel system pri

Switching Commands122ProSafe M4100 and M7100 Managed Switches no monitor sessionUse this command without optional parameters to remove the monitor ses

Switching Commands123 ProSafe M4100 and M7100 Managed SwitchesStatic MAC FilteringThe commands in this section describe how to configure static MAC fi

Switching Commands124ProSafe M4100 and M7100 Managed Switches no macfilter This command removes all filtering restrictions and the static MAC filter e

Switching Commands125 ProSafe M4100 and M7100 Managed Switches6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6. The <vlanid> paramet

Switching Commands126ProSafe M4100 and M7100 Managed Switches 6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6. The <vlanid> paramet

Mac AddressTypeDescriptionInterfacesSwitching Commands127 ProSafe M4100 and M7100 Managed SwitchesDHCP L2 Relay Agent CommandsYou can enable the switc

Switching Commands128ProSafe M4100 and M7100 Managed Switches Separate non-consecutive IDs with a comma (,), and do not insert spaces or zeros in betw

Switching Commands129 ProSafe M4100 and M7100 Managed Switchesno dhcp l2relay vlanUse this command to disable the DHCP L2 Relay agent for a set of VLA

Using the Command-Line Interface13 ProSafe M4100 and M7100 Managed Switchescommands. You can execute the User EXEC mode commands in the Privileged EXE

Switching Commands130ProSafe M4100 and M7100 Managed Switches show dhcp l2relay interfaceUse this command to display DHCP L2 relay configuration speci

Switching Commands131 ProSafe M4100 and M7100 Managed Switches5 Enabled Enabled --NULL—6 Enabled

Switching Commands132ProSafe M4100 and M7100 Managed Switches show dhcp client vendor-id-optionUse this command to display the configured administrati

Switching Commands133 ProSafe M4100 and M7100 Managed Switchesno ip dhcp snooping vlanUse this command to disable DHCP Snooping on VLANs.Format no ip

Switching Commands134ProSafe M4100 and M7100 Managed Switches no ip dhcp snooping database write-delayUse this command to set the write delay value to

Switching Commands135 ProSafe M4100 and M7100 Managed Switchesno ip dhcp snooping limitUse this command to set the rate at which the DHCP Snooping mes

Switching Commands136ProSafe M4100 and M7100 Managed Switches ip verify sourceUse this command to configure the IPSG source ID attribute to filter the

Switching Commands137 ProSafe M4100 and M7100 Managed Switches0/1 Yes No 0/2 No Yes 0/3 No

Switching Commands138ProSafe M4100 and M7100 Managed Switches show ip dhcp snooping databaseUse this command to display the DHCP Snooping configuratio

Switching Commands139 ProSafe M4100 and M7100 Managed SwitchesExample: The following shows example CLI display output for the command.(switch) #show i

Using the Command-Line Interface14ProSafe M4100 and M7100 Managed Switches Table 6 explains how to enter or exit each mode.Router OSPF ConfigSwitch

Switching Commands140ProSafe M4100 and M7100 Managed Switches show ip verify sourceUse this command to display the IPSG configurations on all ports.Fo

Switching Commands141 ProSafe M4100 and M7100 Managed SwitchesThe following shows sample CLI display output for the command.(switch) #show ip source b

Switching Commands142ProSafe M4100 and M7100 Managed Switches ip arp inspection validateUse this command to enable additional validation checks like s

Switching Commands143 ProSafe M4100 and M7100 Managed Switchesno ip arp inspection trustUse this command to configure an interface as untrusted for Dy

Switching Commands144ProSafe M4100 and M7100 Managed Switches no ip arp inspection filterUse this command to unconfigure the ARP ACL used to filter in

Switching Commands145 ProSafe M4100 and M7100 Managed Switchesthe given VLAN list. The global configuration includes the source mac validation, destin

Switching Commands146ProSafe M4100 and M7100 Managed Switches Example: The following shows example CLI display output for the command show ip arp insp

Switching Commands147 ProSafe M4100 and M7100 Managed Switchescommand displays the values for that interface whether the interface is enabled for DAI

Switching Commands148ProSafe M4100 and M7100 Managed Switches IGMP Snooping Configuration CommandsThis section describes the commands you use to confi

Format no set igmp <vlanid>ModeSwitching Commands149 ProSafe M4100 and M7100 Managed Switchesset igmp interfacemode This command enables IGMP Sn

Using the Command-Line Interface15 ProSafe M4100 and M7100 Managed SwitchesPolicy-Map ConfigFrom the Global Config mode, enter policy-map <name&g

Switching Commands150ProSafe M4100 and M7100 Managed Switches no set igmp fast-leaveThis command disables IGMP Snooping fast-leave admin mode on a sel

Switching Commands151 ProSafe M4100 and M7100 Managed Switchesparticular group in that interface. This value must be less than the IGMP Query Interval

Switching Commands152ProSafe M4100 and M7100 Managed Switches no set igmp mcrtrexpiretimeThis command sets the Multicast Router Present Expiration tim

Switching Commands153 ProSafe M4100 and M7100 Managed Switchesset igmp report-suppressionUse this command to suppress the IGMP reports on a given VLAN

Switching Commands154ProSafe M4100 and M7100 Managed Switches mac address-table multicast forbidden-unregistered vlanUse this command to forbid forwar

Switching Commands155 ProSafe M4100 and M7100 Managed Switchesshow igmpsnoopingThis command displays IGMP Snooping information. Configured information

Switching Commands156ProSafe M4100 and M7100 Managed Switches show igmpsnooping mrouter interfaceThis command displays information about statically co

Switching Commands157 ProSafe M4100 and M7100 Managed Switchesshow mac-address-table igmpsnoopingThis command displays the IGMP Snooping entries in th

Switching Commands158ProSafe M4100 and M7100 Managed Switches set igmp querierUse this command to enable IGMP Snooping Querier on the system, using Gl

Switching Commands159 ProSafe M4100 and M7100 Managed Switchesno set igmp querier query-intervalUse this command to set the IGMP Querier Query Interva

Using the Command-Line Interface16ProSafe M4100 and M7100 Managed Switches Command Completion and AbbreviationCommand completion finishes spelling the

Switching Commands160ProSafe M4100 and M7100 Managed Switches than the Snooping Querier’s address, it stops sending periodic queries. If the Snooping

Switching Commands161 ProSafe M4100 and M7100 Managed SwitchesWhen you specify a value for <vlanid>, the following additional information appear

Switching Commands162ProSafe M4100 and M7100 Managed Switches interface. MLD Snooping functionality is re-enabled if you disable routing or remove por

Switching Commands163 ProSafe M4100 and M7100 Managed Switchesset mld fast-leaveUse this command to enable MLD Snooping fast-leave admin mode on a sel

Switching Commands164ProSafe M4100 and M7100 Managed Switches no set groupmembership-intervalUse this command to set the MLDv2 Group Membership Interv

Switching Commands165 ProSafe M4100 and M7100 Managed Switchesinterfaces with multicast routers attached. The range is 0–3600 seconds. A value of 0 in

Switching Commands166ProSafe M4100 and M7100 Managed Switches no set mld mrouter interfaceUse this command to disable the status of the interface as a

Switching Commands167 ProSafe M4100 and M7100 Managed SwitchesWhen you specify a value for vlanid, the following information appears.VLAN Admin Modesh

VLAN IDMAC AddressTypeDescriptionInterfacesSwitching Commands168ProSafe M4100 and M7100 Managed Switches MLD Snooping Querier Commands In an IPv6 envi

Switching Commands169 ProSafe M4100 and M7100 Managed Switchesno set mld querier Use this command to disable MLD Snooping Querier on the system. Use t

Using the Command-Line Interface17 ProSafe M4100 and M7100 Managed SwitchesCLI Line-Editing ConventionsTable 8 describes the key combinations you can

Switching Commands170ProSafe M4100 and M7100 Managed Switches set mld querier election participateUse this command to enable the Snooping Querier to p

Switching Commands171 ProSafe M4100 and M7100 Managed SwitchesWhen you specify a value for vlanid, the following information appears.When the optional

Switching Commands172ProSafe M4100 and M7100 Managed Switches port-securityThis command enables port locking at the system level (Global Config) or po

Switching Commands173 ProSafe M4100 and M7100 Managed Switchesno port-security max-staticThis command sets maximum number of statically locked MAC add

Switching Commands174ProSafe M4100 and M7100 Managed Switches no port-security mac-address stickyThe no form removes the sticky mode. The sticky MAC a

Switching Commands175 ProSafe M4100 and M7100 Managed Switchesshow port-security staticThis command displays the statically locked MAC addresses for p

Switching Commands176ProSafe M4100 and M7100 Managed Switches lldp receiveUse this command to enable the LLDP receive capability. DefaultFormat lldp r

Switching Commands177 ProSafe M4100 and M7100 Managed SwitchesUse port-desc to transmit the port description TLV. To configure the port description, s

Switching Commands178ProSafe M4100 and M7100 Managed Switches no lldp notificationUse this command to disable notifications.DefaultFormat no lldp noti

Switching Commands179 ProSafe M4100 and M7100 Managed Switchesshow lldpUse this command to display a summary of the current LLDP configuration.Format

Using the Command-Line Interface18ProSafe M4100 and M7100 Managed Switches enable Enter into user privilege mode.help

Switching Commands180ProSafe M4100 and M7100 Managed Switches show lldp statisticsUse this command to display the current LLDP traffic and remote tabl

Switching Commands181 ProSafe M4100 and M7100 Managed Switchesshow lldp remote-deviceUse this command to display summary information about remote devi

Switching Commands182ProSafe M4100 and M7100 Managed Switches show lldp remote-device detailUse this command to display detailed information about rem

Switching Commands183 ProSafe M4100 and M7100 Managed SwitchesPort ID: 00:FC:E3:90:01:11System Name:System Description:Port Description:System Capabil

Switching Commands184ProSafe M4100 and M7100 Managed Switches LLDP-MED CommandsLink Layer Discovery Protocol - Media Endpoint Discovery (LLDP-MED) (AN

Switching Commands185 ProSafe M4100 and M7100 Managed Switchesno ldp med confignotificationUse this command to disable notifications.Format no lldp me

Switching Commands186ProSafe M4100 and M7100 Managed Switches lldp med allFormat lldp med allModeUse this command to configure LLDP-MED on all the por

Switching Commands187 ProSafe M4100 and M7100 Managed Switcheslldp med transmit-tlv allUse this command to specify which optional Type Length Values (

Switching Commands188ProSafe M4100 and M7100 Managed Switches Example: The following shows example CLI display output for the command.(switch) #show l

Switching Commands189 ProSafe M4100 and M7100 Managed Switches 0/13 Down Disabled Disabled Disabled 0,1 0/14 Down Disabled Disa

1922. Switching CommandsThis chapter describes the switching commands available in the managed switch CLI. This chapter contains the following secti

Switching Commands190ProSafe M4100 and M7100 Managed Switches (Switch) #show lldp med local-device detail 0/8LLDP MED Local Device DetailInterface: 0/

Switching Commands191 ProSafe M4100 and M7100 Managed Switchesshow lldp med remote-deviceThis command displays summary information about remote device

Switching Commands192ProSafe M4100 and M7100 Managed Switches Example: The following shows example CLI display output for the command.(Switch) #show l

Switching Commands193 ProSafe M4100 and M7100 Managed SwitchesLLDP MED Remote Device DetailLocal Interface: 0/8Remote Identifier: 18CapabilitiesMED Ca

Switching Commands194ProSafe M4100 and M7100 Managed Switches This section describes the commands you use to configure Denial of Service (DoS) Control

Switching Commands195 ProSafe M4100 and M7100 Managed Switchesdos-control sipdipThis command enables Source IP address = Destination IP address (SIP=D

Switching Commands196ProSafe M4100 and M7100 Managed Switches dos-control tcpfragThis command enables TCP Fragment Denial of Service protection. If th

Switching Commands197 ProSafe M4100 and M7100 Managed SwitchesNote: Some applications mirror source and destination L4 ports - RIP for example uses 5

Switching Commands198ProSafe M4100 and M7100 Managed Switches this type of attack. If packets ingress with SMAC=DMAC, the packets will be dropped if t

Switching Commands199 ProSafe M4100 and M7100 Managed Switchesno dos-control udpportThis command disables UDP L4 source = destination port number (Sou

2ProSafe M4100 and M7100 Managed Switches SupportThank you for selecting NETGEAR products. After installing your device, locate the serial number on t

Switching Commands20ProSafe M4100 and M7100 Managed Switches • Port Security Commands • LLDP (802.1AB) Commands • LLDP-MED Commands •

Switching Commands200ProSafe M4100 and M7100 Managed Switches dos-control tcpsynThis command enables TCP SYN and L4 source = 0-1023 Denial of Service

Switching Commands201 ProSafe M4100 and M7100 Managed Switchesno dos-control tcpfinurgpshThis command sets disables TCP FIN and URG and PSH and SEQ=0

Switching Commands202ProSafe M4100 and M7100 Managed Switches no dos-control icmpv6This command disables Maximum ICMP Packet Size Denial of Service pr

Switching Commands203 ProSafe M4100 and M7100 Managed SwitchesMAC Database CommandsThis section describes the commands you use to configure and view i

Switching Commands204ProSafe M4100 and M7100 Managed Switches no bridge aging-timeThis command sets the forwarding database address aging timeout to t

Switching Commands205 ProSafe M4100 and M7100 Managed Switchesshow mac-address-table statsThis command displays the Multicast Forwarding Database (MFD

Switching Commands206ProSafe M4100 and M7100 Managed Switches isdp timerThis command sets the period of time between sending new ISDP packets. The ran

Switching Commands207 ProSafe M4100 and M7100 Managed Switchesclear isdp countersThis command clears ISDP counters.Format clear isdp countersModeclear

Switching Commands208ProSafe M4100 and M7100 Managed Switches show isdp interfaceThis command displays ISDP settings for the specified interface.Forma

Switching Commands209 ProSafe M4100 and M7100 Managed SwitchesExample: The following shows example CLI display output for the command.(Switch) #show i

Switching Commands21 ProSafe M4100 and M7100 Managed SwitchesPort Configuration CommandsThis section describes the commands you use to view and config

Switching Commands210ProSafe M4100 and M7100 Managed Switches debug isdp packetThis command enables tracing of ISDP packets processed by the switch. I

Switching Commands211 ProSafe M4100 and M7100 Managed Switchesdropped frames, while allowing traffic that has greater loss tolerance to continue to fl

Switching Commands212ProSafe M4100 and M7100 Managed Switches VLAN tagging must be enabled to carry the 802.1p value through the network. The number o

21333. Multicast VLAN Registration (MVR)This chapter contains the following sections:• About MVR • MVR Commands

Multicast VLAN Registration (MVR)214ProSafe M4100 and M7100 Managed Switches About MVRInternet Group Management Protocol (IGMP) Layer 3 is widely used

Multicast VLAN Registration (MVR)215 ProSafe M4100 and M7100 Managed Switchesno mvr groupThis command removes the MVR membership group. mvr mode This

Multicast VLAN Registration (MVR)216ProSafe M4100 and M7100 Managed Switches mvr vlanThis command sets the MVR multicast VLAN. no mvr vlanThis command

Multicast VLAN Registration (MVR)217 ProSafe M4100 and M7100 Managed Switchesmvr typeThis command sets the MVR port type. When a port is set as source

Multicast VLAN Registration (MVR)218ProSafe M4100 and M7100 Managed Switches The following table explains the output parameters.Example:(Switch)#show

Multicast VLAN Registration (MVR)219 ProSafe M4100 and M7100 Managed Switches(switch)#show mvr members 224.1.1.1MVR Group IP Status

Switching Commands22ProSafe M4100 and M7100 Managed Switches no auto-negotiateThis command disables automatic negotiation on a port.Note: Automatic s

Multicast VLAN Registration (MVR)220ProSafe M4100 and M7100 Managed Switches show mvr trafficThis command displays global MVR statistics.The following

22144. Routing CommandsThis chapter describes the routing commands available in the 7000 series CLI.Note: Some commands described in this chapter r

Routing Commands222ProSafe M4100 and M7100 Managed Switches Address Resolution Protocol (ARP) CommandsThis section describes the commands you use to c

Routing Commands223 ProSafe M4100 and M7100 Managed Switchesip proxy-arpThis command enables proxy ARP on a router interface. Without proxy ARP, a dev

Routing Commands224ProSafe M4100 and M7100 Managed Switches no arp dynamicrenewThis command prevents dynamic ARP entries from renewing when they age o

Routing Commands225 ProSafe M4100 and M7100 Managed Switchesno arp retriesThis command configures the default ARP count of maximum request for retries

Routing Commands226ProSafe M4100 and M7100 Managed Switches show arpThis command displays the Address Resolution Protocol (ARP) cache. The displayed r

Age Time (seconds)Response Time (seconds)RetriesCache SizeDynamic Renew ModeTotal Entry Count Current / PeakStatic Entry Count Current / MaxRouting Co

Routing Commands228ProSafe M4100 and M7100 Managed Switches no routing This command disables routing for an interface. You can view the current value

Routing Commands229 ProSafe M4100 and M7100 Managed Switchesno ip addressThis command deletes an IP address from an interface. The value for <ipadd

Switching Commands23 ProSafe M4100 and M7100 Managed Switchesno mtu This command sets the default MTU size (in bytes) for the interface. Format no mtu

Routing Commands230ProSafe M4100 and M7100 Managed Switches no ip default-gatewayUse this command to remove the default gateway address from the confi

Routing Commands231 ProSafe M4100 and M7100 Managed Switchesip routeThis command configures a static route. The <ipaddr> parameter is a valid

Routing Commands232ProSafe M4100 and M7100 Managed Switches ip route defaultThis command configures the default route. The value for <nexthopip>

Routing Commands233 ProSafe M4100 and M7100 Managed Switchesip netdirbcast This command enables the forwarding of network-directed broadcasts. When en

Routing Commands234ProSafe M4100 and M7100 Managed Switches no ip mtuThis command resets the ip mtu to the default value.Format no ip mtu <mtu>M

Routing Commands235 ProSafe M4100 and M7100 Managed Switchesshow ip briefThis command displays all the summary information of the IP, including the IC

Routing Interface StatusPrimary IP AddressSecondary IP AddressMethodRouting ModeAdministrative ModeForward Net Directed BroadcastsProxy ARPLocal Proxy

Routing Commands237 ProSafe M4100 and M7100 Managed SwitchesLink Speed Data Rate... InactiveMAC address...

Routing Commands238ProSafe M4100 and M7100 Managed Switches Maximum Paths The maximum number of next hops in an OSPF routeRouting for NetworksThe addr

Routing Commands239 ProSafe M4100 and M7100 Managed Switchesshow ip route This command displays the routing table. The <ip-address> specifies th

Switching Commands24ProSafe M4100 and M7100 Managed Switches no shutdown allThis command enables all ports.Format no shutdown allModespeed This comman

Routing Commands240ProSafe M4100 and M7100 Managed Switches To administratively control the traffic destined to a particular network and prevent it fr

Routing Commands241 ProSafe M4100 and M7100 Managed SwitchesECMP Group 1 with 2 next hops (used by 1 route) 172.20.33.100 on interface 2/33 172.20.3

Routing Commands242ProSafe M4100 and M7100 Managed Switches The following shows example CLI display output for the command.(router) #show ip route sum

Routing Commands243 ProSafe M4100 and M7100 Managed SwitchesTotal routes... 1032Best Routes (High)...

Routing Commands244ProSafe M4100 and M7100 Managed Switches show ip statsThis command displays IP statistical information. Refer to RFC 1213 for more

Routing Commands245 ProSafe M4100 and M7100 Managed Switchesip irdp This command enables Router Discovery on an interface. DefaultFormat ip irdp Moden

Routing Commands246ProSafe M4100 and M7100 Managed Switches no ip irdp holdtime This command configures the default value, in seconds, of the holdtime

Routing Commands247 ProSafe M4100 and M7100 Managed Switchesip irdp preference This command configures the preferability of the address as a default r

Routing Commands248ProSafe M4100 and M7100 Managed Switches Virtual LAN Routing CommandsThis section describes the commands you use to view and config

Routing Commands249 ProSafe M4100 and M7100 Managed SwitchesVirtual Router Redundancy Protocol CommandsThis section describes the commands you use to

Switching Commands25 ProSafe M4100 and M7100 Managed Switchesshow port advertiseUse this command to display the local administrative link advertisemen

Routing Commands250ProSafe M4100 and M7100 Managed Switches ip vrrp modeThis command enables the virtual router configured on the specified interface.

Routing Commands251 ProSafe M4100 and M7100 Managed Switchesrequired when authorization type is simple text apssword. The parameter <vrid> is th

Routing Commands252ProSafe M4100 and M7100 Managed Switches another router in the group higher than the master’s priority, the router will take over a

Routing Commands253 ProSafe M4100 and M7100 Managed Switchesdecrement) for each downed interface. The default priority decrement is changed using the

Routing Commands254ProSafe M4100 and M7100 Managed Switches ip vrrp <vrid> accept-modeThis command is used to allow a router to respond to ICMP

UptimeProtocolState Transitioned to Master Advertisement ReceivedAdvertisement Interval Errors Authentication FailureIP TTL errorsZero Priority Packet

Admin ModeRouter Checksum ErrorsRouter Version ErrorsRouter VRID ErrorsRouting Commands256ProSafe M4100 and M7100 Managed Switches show ip vrrp interf

Routing Commands257 ProSafe M4100 and M7100 Managed SwitchesAdvertisement Interval (secs)... 1Pre-empt Mode...

Routing Commands258ProSafe M4100 and M7100 Managed Switches no bootpdhcprelay cidoptmodeThis command disables the circuit ID option mode for BootP/DHC

Routing Commands259 ProSafe M4100 and M7100 Managed Switchesshow bootpdhcprelayThis command displays the BootP/DHCP Relay information.Format show boot

InterfaceType• Mirror - this port is a monitoring port. For more information, see Port Mirroring on page 121.• PC Mbr- this port is a member of a por

Routing Commands260ProSafe M4100 and M7100 Managed Switches The ip helper-address command forwards specific UDP broadcast from one interface to anothe

Routing Commands261 ProSafe M4100 and M7100 Managed Switchesip helper-addressUse this command to add a unicast helper address to the list of helper ad

Routing Commands262ProSafe M4100 and M7100 Managed Switches The following shows example CLI display output for the command.(switch) #show ip helper-ad

Routing Commands263 ProSafe M4100 and M7100 Managed SwitchesOpen Shortest Path First (OSPF) CommandsThis section describes the commands you use to vie

Routing Commands264ProSafe M4100 and M7100 Managed Switches no network area (OSPF)Use this command to disable the OSPFv2 on an interface if the IP add

Routing Commands265 ProSafe M4100 and M7100 Managed Switchesno 1583compatibilityThis command disables OSPF 1583 compatibility. Format no 1583compatibi

Routing Commands266ProSafe M4100 and M7100 Managed Switches no area nssa default-info-originate (OSPF)This command disables the default route advertis

Routing Commands267 ProSafe M4100 and M7100 Managed Switchesof candidate causes the router to participate in the translator election process when it a

Routing Commands268ProSafe M4100 and M7100 Managed Switches no area rangeThe no form of this command deletes a specified area range or reverts an opti

Routing Commands269 ProSafe M4100 and M7100 Managed Switchesno area stubThis command deletes a stub area for the specified area ID.Format no area <

Switching Commands27 ProSafe M4100 and M7100 Managed Switchesshow port description This command displays the port description for every port.Format sh

Routing Commands270ProSafe M4100 and M7100 Managed Switches composed of standard displayable, non-control keystrokes from a Standard 101/102-key keybo

Routing Commands271 ProSafe M4100 and M7100 Managed Switchesarea virtual-link hello-interval (OSPF)This command configures the hello interval for the

Routing Commands272ProSafe M4100 and M7100 Managed Switches area virtual-link transmit-delay (OSPF)This command configures the transmit delay for the

Routing Commands273 ProSafe M4100 and M7100 Managed SwitchesbandwidthBy default, OSPF computes the link cost of an interface as the ratio of the refer

Routing Commands274ProSafe M4100 and M7100 Managed Switches clear ip ospf configurationUse this command to reset the OSPF configuration to factory def

Routing Commands275 ProSafe M4100 and M7100 Managed Switchesdefault-information originate (OSPF)This command is used to control the advertisement of d

Routing Commands276ProSafe M4100 and M7100 Managed Switches no distance ospf This command sets the default route preference value of OSPF routes in th

Routing Commands277 ProSafe M4100 and M7100 Managed Switchesexternal-lsdb-limit (OSPF)This command configures the external LSDB limit for OSPF. If the

Routing Commands278ProSafe M4100 and M7100 Managed Switches authentication key must be 8 bytes or less if the authentication type is simple. If the ty

Routing Commands279 ProSafe M4100 and M7100 Managed Switchesno ip ospf database-filter all outUse this command in Interface Configuration mode to enab

Switching Commands28ProSafe M4100 and M7100 Managed Switches interface loopbackUse this command to enter the Interface Config mode for a loopback inte

Routing Commands280ProSafe M4100 and M7100 Managed Switches no ip ospf hello-intervalThis command sets the default OSPF hello interval for the specifi

Routing Commands281 ProSafe M4100 and M7100 Managed Switchesno ip ospf priority This command sets the default OSPF priority for the specified router i

Routing Commands282ProSafe M4100 and M7100 Managed Switches ip ospf mtu-ignoreThis command disables OSPF maximum transmission unit (MTU) mismatch dete

Routing Commands283 ProSafe M4100 and M7100 Managed Switchesno redistribute This command configures OSPF protocol to prohibit redistribution of routes

Routing Commands284ProSafe M4100 and M7100 Managed Switches passive-interface (OSPF)Use this command to set the interface or tunnel as passive. It ove

Routing Commands285 ProSafe M4100 and M7100 Managed Switchestimers pacing lsa-groupTo adjust how OSPF groups LSAs for periodic refresh, use this comma

Routing Commands286ProSafe M4100 and M7100 Managed Switches trapflags (OSPF)Use this command to enable individual OSPF traps, enable a group of trap f

Routing Commands287 ProSafe M4100 and M7100 Managed Switchesno trapflags Use this command to revert to the default reference bandwidth. • To disab

Routing Commands288ProSafe M4100 and M7100 Managed Switches show ip ospfThis command displays information relevant to the OSPF router. Format show ip

Routing Commands289 ProSafe M4100 and M7100 Managed SwitchesASBR StatusReflects whether the ASBR mode is enabled or disabled. Enable implies that the

Switching Commands29 ProSafe M4100 and M7100 Managed SwitchesIPv6 Prefix isThe IPv6 address of the interface.MTU sizeThe maximum transmission size for

Routing Commands290ProSafe M4100 and M7100 Managed Switches The following shows example CLI display output for the command.(Switch) #show ip ospfRoute

Routing Commands291 ProSafe M4100 and M7100 Managed SwitchesNumber of Active Areas... 3 (3 normal, 0 stub, 0 nssa) ABR Status...

AreaIDExternal RoutingSpf RunsArea Border Router CountArea LSA CountArea LSA ChecksumImport Summary LSAsOSPF Stub Metric ValueRouting Commands292ProSa

Routing Commands293 ProSafe M4100 and M7100 Managed Switchesshow ip ospf asbr This command displays the internal OSPF routing table entries to Autonom

Routing Commands294ProSafe M4100 and M7100 Managed Switches The information below is only displayed if OSPF is enabled.Format show ip ospf [<areaid

Routing Commands295 ProSafe M4100 and M7100 Managed Switchesshow ip ospf interface This command displays the information for the IFO object or virtual

Routing Commands296ProSafe M4100 and M7100 Managed Switches The information below will only be displayed if OSPF is enabled.OSPF Interface TypeStateDe

Routing Commands297 ProSafe M4100 and M7100 Managed Switchesshow ip ospf interface stats This command displays the statistics for a specific interface

Routing Commands298ProSafe M4100 and M7100 Managed Switches The command lists the number of OSPF packets of each type sent and received on the interfa

Routing Commands299 ProSafe M4100 and M7100 Managed Switchesshow ip ospf neighbor This command displays information about OSPF neighbors. If you do no

3ContentsChapter 1 Using the Command-Line InterfaceLicensing and Command Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8Com

Switching Commands30ProSafe M4100 and M7100 Managed Switches Spanning Tree Protocol (STP) CommandsThis section describes the commands you use to confi

Routing Commands300ProSafe M4100 and M7100 Managed Switches If you specify an IP address for the neighbor router, the following fields display:Interfa

Routing Commands301 ProSafe M4100 and M7100 Managed Switchesshow ip ospf rangeThis command displays information about the area ranges for the specifie

Routing Commands302ProSafe M4100 and M7100 Managed Switches show ip ospf stub tableThis command displays the OSPF stub table. The information below wi

Routing Commands303 ProSafe M4100 and M7100 Managed SwitchesThe following shows example CLI display output for the command. (netgear switch) #show ip

Routing Commands304ProSafe M4100 and M7100 Managed Switches show ip ospf virtual-link briefThis command displays the OSPF Virtual Interface informatio

Routing Commands305 ProSafe M4100 and M7100 Managed Switchesavoiding announcement of a topology change and the potential for flooding of LSAs and shor

Routing Commands306ProSafe M4100 and M7100 Managed Switches set long enough to allow the restarting router to reestablish all of its adjacencies and c

Routing Commands307 ProSafe M4100 and M7100 Managed Switchesnsf helper disableUse this command to disable helpful neighbor functionality for OSPF.Note

Routing Commands308ProSafe M4100 and M7100 Managed Switches max-metric router-lsaTo configure OSPF to enter stub router mode, use this command in Rout

Routing Commands309 ProSafe M4100 and M7100 Managed Switchesthe command no max-metric router-lsa on-startup. The command no max-metric router-lsa summ

Switching Commands31 ProSafe M4100 and M7100 Managed Switchesno spanning-tree bpdufilterUse this command to disable BPDU Filter on the interface or ra

Routing Commands310ProSafe M4100 and M7100 Managed Switches show dampening interfaceThis command summarizes the number of interfaces configured with d

Routing Commands311 ProSafe M4100 and M7100 Managed Switches Any change in the dampening configuration resets the current penalty, reuse time, and sup

Routing Commands312ProSafe M4100 and M7100 Managed Switches ip ripThis command enables RIP on a router interface.DefaultFormat ip ripModeno ip ripThis

Routing Commands313 ProSafe M4100 and M7100 Managed Switchesdefault-metric (RIP)This command is used to set a default for the metric of distributed ro

Routing Commands314ProSafe M4100 and M7100 Managed Switches no distribute-list outThis command is used to specify the access list to filter routes rec

Routing Commands315 ProSafe M4100 and M7100 Managed Switchesno ip rip receive version This command configures the interface to allow RIP control packe

Routing Commands316ProSafe M4100 and M7100 Managed Switches split-horizonThis command sets the RIP split horizon mode. Split horizon is a technique fo

Routing Commands317 ProSafe M4100 and M7100 Managed Switchesshow ip rip This command displays information relevant to the RIP router.Format show ip r

Routing Commands318ProSafe M4100 and M7100 Managed Switches show ip rip interface This command displays information related to a particular RIP interf

Routing Commands319 ProSafe M4100 and M7100 Managed Switchesip unreachablesUse this command to enable the generation of ICMP Destination Unreachable m

Switching Commands32ProSafe M4100 and M7100 Managed Switches spanning-tree bpduguardUse this command to enable BPDU Guard on the switch.DefaultFormat

Routing Commands320ProSafe M4100 and M7100 Managed Switches no ip icmp echo-replyUse this command to prevent the generation of ICMP Echo Reply message

32155. IP Multicast CommandsThis chapter describes the IP Multicast commands available in the managed switch CLI. Note: Some commands described in

IP Multicast Commands322ProSafe M4100 and M7100 Managed Switches no ip mcast boundaryThis command deletes an administrative scope multicast boundary s

IP Multicast Commands323 ProSafe M4100 and M7100 Managed Switchesno ip multicast ttl-thresholdThis command applies the default <ttlthreshold> to

IP Multicast Commands324ProSafe M4100 and M7100 Managed Switches show ip mcast boundaryThis command displays all the configured administrative scoped

IP Multicast Commands325 ProSafe M4100 and M7100 Managed SwitchesIf you use the detail parameter, the command displays the following fields:Source IPG

IP Multicast Commands326ProSafe M4100 and M7100 Managed Switches show ip mcast mroute sourceThis command displays the multicast configuration settings

IP Multicast Commands327 ProSafe M4100 and M7100 Managed Switchesip dvmrp(Global Config)This command sets administrative mode of DVMRP in the router t

IP Multicast Commands328ProSafe M4100 and M7100 Managed Switches no ip dvmrp trapflagsThis command disables the DVMRP trap mode.Format no ip dvmrp tra

IP Multicast Commands329 ProSafe M4100 and M7100 Managed Switchesshow ip dvmrp interfaceThis command displays the interface information for DVMRP on t

Switching Commands33 ProSafe M4100 and M7100 Managed Switchesspanning-tree configuration revisionThis command sets the Configuration Identifier Revisi

IfIndexNbr IP AddrStateUp TimeExpiry TimeGeneration IDMajor VersionMinor VersionCapabilitiesReceived RoutesRcvd Bad PktsRcvd Bad RoutesIP Multicast Co

IP Multicast Commands331 ProSafe M4100 and M7100 Managed Switchesshow ip dvmrp pruneThis command displays the table listing the router’s upstream prun

IP Multicast Commands332ProSafe M4100 and M7100 Managed Switches routing across the Internet, independent of the mechanisms provided by any particular

IP Multicast Commands333 ProSafe M4100 and M7100 Managed Switchesno ip pim hello-intervalThis command resets the transmission frequency of hello messa

IP Multicast Commands334ProSafe M4100 and M7100 Managed Switches Join Prune Interval (secs) 60DR Priority NABSR Border DisabledNeighbor Count 1Designa

IP Multicast Commands335 ProSafe M4100 and M7100 Managed Switchesno ip pim sparse(Global Config)This command is used to administratively disable PIM-S

IP Multicast Commands336ProSafe M4100 and M7100 Managed Switches no ip pim bsr-candidateThis command is used to disable the router to announce its can

IP Multicast Commands337 ProSafe M4100 and M7100 Managed Switches<groupaddress> is the group address supported by the RP. The parameter <grou

IP Multicast Commands338ProSafe M4100 and M7100 Managed Switches ip pim ssmUse this command to define the Source Specific Multicast (SSM) range of IP

PIM ModeInterfaceInterface-ModeOperational-StatusIP Multicast Commands339 ProSafe M4100 and M7100 Managed SwitchesExample 1:(Switch) #show ip pimPIM M

Switching Commands34ProSafe M4100 and M7100 Managed Switches • Use 802.1s to specify that the switch transmits MST BPDUs (IEEE 802.1s functionalit

IP Multicast Commands340ProSafe M4100 and M7100 Managed Switches show ip pim bsr-routerThis command displays the bootstrap router (BSR) information. T

IP Multicast Commands341 ProSafe M4100 and M7100 Managed Switchesshow ip pim rp mappingThis command displays the mappings for the PIM group to the act

IP Multicast Commands342ProSafe M4100 and M7100 Managed Switches Group Mask 255.255.0.0Origin StaticExpiry Time (hh:mm:ss) NAInternet Group Message Pr

IP Multicast Commands343 ProSafe M4100 and M7100 Managed Switchesip igmp last-member-query-countThis command sets the number of Group-Specific Queries

IP Multicast Commands344ProSafe M4100 and M7100 Managed Switches no ip igmp query-intervalThis command resets the query interval for the specified int

IP Multicast Commands345 ProSafe M4100 and M7100 Managed Switchesip igmp startup-query-countThis command sets the number of Queries sent out on startu

IGMP Admin ModeInterfaceInterface-ModeOperational-StatusIP Multicast Commands346ProSafe M4100 and M7100 Managed Switches show ip igmp groupsThis comma

IP Multicast Commands347 ProSafe M4100 and M7100 Managed Switchesshow ip igmp interfaceThis command displays the IGMP information for the interface. F

IP Multicast Commands348ProSafe M4100 and M7100 Managed Switches show ip igmp interface membershipThis command displays the list of interfaces that ha

Querier StatusQuerier IP AddressQuerier Up TimeQuerier Expiry TimeWrong Version QueriesNumber of JoinsNumber of GroupsIP Multicast Commands349 ProSafe

Switching Commands35 ProSafe M4100 and M7100 Managed Switchesspanning-tree tcnguardThis command enables the propagation of received topology change no

IP Multicast Commands350ProSafe M4100 and M7100 Managed Switches ip igmp-proxy unsolicit-rprt-intervalThis command sets the unsolicited report interva

IP Multicast Commands351 ProSafe M4100 and M7100 Managed SwitchesExample: The following example shows CLI display output for the command.(Switch) #sho

IP Multicast Commands352ProSafe M4100 and M7100 Managed Switches Example: The following shows example CLI display output for the command.(Switch) #sho

IP Multicast Commands353 ProSafe M4100 and M7100 Managed SwitchesExample: The following shows example CLI display output for the command.(Switch) #sho

IP Multicast Commands354ProSafe M4100 and M7100 Managed Switches Example: The following shows example CLI display output for the command.(Switch) #sho

35566. IPv6 CommandsThis chapter describes the IPv6 commands available in the managed switch CLI. Note: Some commands described in this chapter req

IPv6 Commands356ProSafe M4100 and M7100 Managed Switches Tunnel Interface CommandsThe commands in this section describe how to create, delete, and man

IPv6 Commands357 ProSafe M4100 and M7100 Managed Switchestunnel mode ipv6ipThis command specifies the mode of the tunnel. With the optional 6to4 argum

IPv6 Commands358ProSafe M4100 and M7100 Managed Switches ipv6 hop-limitThis command defines the unicast hop count used in ipv6 packets originated by t

IPv6 Commands359 ProSafe M4100 and M7100 Managed Switchesno ipv6 enableUse this command to disable IPv6 routing on an interface.Format no ipv6 enableM

Switching Commands36ProSafe M4100 and M7100 Managed Switches no spanning-tree max-hopsThis command sets the Bridge Max Hops parameter for the Common a

IPv6 Commands360ProSafe M4100 and M7100 Managed Switches ipv6 address autoconfigThis command is used to enable stateless address autoconfiguration cap

IPv6 Commands361 ProSafe M4100 and M7100 Managed Switchesusing a link-local address as the next hop. A route with a preference of 255 cannot be used t

IPv6 Commands362ProSafe M4100 and M7100 Managed Switches ipv6 mtuThis command sets the maximum transmission unit (MTU) size, in bytes, of IPv6 packets

IPv6 Commands363 ProSafe M4100 and M7100 Managed Switchesipv6 nd managed-config-flagThis command sets the “managed address configuration” flag in rout

IPv6 Commands364ProSafe M4100 and M7100 Managed Switches no ipv6 nd other-config-flagThis command resets the “other stateful configuration” flag back

IPv6 Commands365 ProSafe M4100 and M7100 Managed Switchesipv6 nd reachable-timeThis command sets the router advertisement time to consider a neighbor

IPv6 Commands366ProSafe M4100 and M7100 Managed Switches ipv6 nd router-preferenceFormat no ipv6 router-preferenceModeThis command will set the router

IPv6 Commands367 ProSafe M4100 and M7100 Managed Switchesno ipv6 icmp error-intervalUse the no form of the command to return burst-interval and burst-

IPv6 Commands368ProSafe M4100 and M7100 Managed Switches show ipv6 interfaceUse this command to show the usability status of IPv6 interfaces and wheth

IPv6 Commands369 ProSafe M4100 and M7100 Managed SwitchesExample: The following shows example CLI display output for the command.(Switch) #show ipv6 i

Switching Commands37 ProSafe M4100 and M7100 Managed SwitchesIf you specify cost, this command sets the path cost for this port within a multiple span

IPv6 Commands370ProSafe M4100 and M7100 Managed Switches show ipv6 neighborUse this command to display information about the IPv6 neighbors.Format sho

IPv6 Commands371 ProSafe M4100 and M7100 Managed SwitchesNote: If you use the connected keyword for <protocol>, the all option is not available

IPv6 Commands372ProSafe M4100 and M7100 Managed Switches Example: The following shows example CLI display output for the command.(Switch) #show ipv6 r

IPv6 Commands373 ProSafe M4100 and M7100 Managed Switchesshow ipv6 route preferencesUse this command to show the preference value associated with the

IPv6 Commands374ProSafe M4100 and M7100 Managed Switches The following example shows CLI display output for the command.(switch) #show ipv6 route summ

IPv6 Commands375 ProSafe M4100 and M7100 Managed SwitchesOSPF Routes... 13 Intra Area Routes...

IPv6 Commands376ProSafe M4100 and M7100 Managed Switches show ipv6 trafficUse this command to show traffic and statistics for IPv6 and ICMPv6. Specify

IPv6 Commands377 ProSafe M4100 and M7100 Managed SwitchesReceived Datagrams Discarded OtherNumber of input IPv6 datagrams for which no problems were e

IPv6 Commands378ProSafe M4100 and M7100 Managed Switches ICMPv6 Messages with errorsNumber of ICMP messages which the interface received but determine

IPv6 Commands379 ProSafe M4100 and M7100 Managed Switchesclear ipv6 route countersThis command resets to zero the IPv6 routing table counters reported

Switching Commands38ProSafe M4100 and M7100 Managed Switches are masked according to the 802.1s specification. This causes the priority to be rounded

IPv6 Commands380ProSafe M4100 and M7100 Managed Switches clear ipv6 statisticsUse this command to clear IPv6 statistics for all interfaces or for a sp

IPv6 Commands381 ProSafe M4100 and M7100 Managed Switchesipv6 ospf cost This command configures the cost on an OSPF interface. The <cost> parame

IPv6 Commands382ProSafe M4100 and M7100 Managed Switches no ipv6 ospf hello-interval This command sets the default OSPF hello interval for the specifi

IPv6 Commands383 ProSafe M4100 and M7100 Managed Switchesno ipv6 ospf networkThis command sets the interface type to the default value.Format no ipv6

IPv6 Commands384ProSafe M4100 and M7100 Managed Switches ipv6 ospf transmit-delay This command sets the OSPF Transit Delay for the specified interface

IPv6 Commands385 ProSafe M4100 and M7100 Managed Switchesno area nssa(OSPFv3) This command disables nssa from the specified area id.Format no area <

IPv6 Commands386ProSafe M4100 and M7100 Managed Switches area nssa no-summary (OSPFv3)This command configures the NSSA so that summary LSAs are not ad

IPv6 Commands387 ProSafe M4100 and M7100 Managed Switchesno area nssa translator-stab-intv (OSPFv3)This command disables the nssa translator’s <sta

IPv6 Commands388ProSafe M4100 and M7100 Managed Switches area stub no-summary (OSPFv3)This command disables the import of Summary LSAs for the stub ar

IPv6 Commands389 ProSafe M4100 and M7100 Managed Switchesno area virtual-link dead-interval(OSPFv3)This command configures the default dead interval f

Switching Commands39 ProSafe M4100 and M7100 Managed Switchesspanning-tree port modeThis command sets the Administrative Switch Port State for this po

IPv6 Commands390ProSafe M4100 and M7100 Managed Switches no area virtual-link retransmit-interval(OSPFv3)This command configures the default retransmi

IPv6 Commands391 ProSafe M4100 and M7100 Managed Switchesno auto-cost reference-bandwidth (OSPFv3)Use this command to set the reference bandwidth to t

IPv6 Commands392ProSafe M4100 and M7100 Managed Switches clear ipv6 ospf neighbor interface To drop adjacency with all neighbors on a specific interfa

IPv6 Commands393 ProSafe M4100 and M7100 Managed Switchesno default-metric (OSPFv3)This command is used to set a default for the metric of distributed

IPv6 Commands394ProSafe M4100 and M7100 Managed Switches exit-overflow-interval (OSPFv3)This command configures the exit overflow interval for OSPF. I

IPv6 Commands395 ProSafe M4100 and M7100 Managed Switchesmaximum-paths (OSPFv3)This command sets the number of paths that OSPF can report for a given

IPv6 Commands396ProSafe M4100 and M7100 Managed Switches no passive-interface(OSPFv3)Use this command to set the interface or tunnel as non-passive. I

IPv6 Commands397 ProSafe M4100 and M7100 Managed Switchestrapflags (OSPFv3)Use this command to enable individual OSPF traps, enable a group of trap fl

IPv6 Commands398ProSafe M4100 and M7100 Managed Switches • To enable all the flags, give the command as trapflags all.DefaultFormat trapflags { al

IPv6 Commands399 ProSafe M4100 and M7100 Managed SwitchesNote: Some of the information below displays only if you enable OSPF and configure certain f

4ProSafe M4100 and M7100 Managed SwitchesIGMP Snooping Configuration Commands . . . . . . . . . . . . . . . . . . . . . . .148IGMP Snooping Querier C

Switching Commands40ProSafe M4100 and M7100 Managed Switches spanning-tree bpduforwardingNormally a switch will not forward Spanning Tree Protocol (ST

IPv6 Commands400ProSafe M4100 and M7100 Managed Switches Maximum Number of Retransmit EntriesThe maximum number of LSAs that can be waiting for acknow

IPv6 Commands401 ProSafe M4100 and M7100 Managed Switchesshow ipv6 ospf abrThis command displays the internal OSPFv3 routes to reach Area Border Route

IPv6 Commands402ProSafe M4100 and M7100 Managed Switches The following OSPF NSSA-specific information displays only if the area is configured as an NS

IPv6 Commands403 ProSafe M4100 and M7100 Managed Switchesshow ipv6 ospf database This command displays information about the link state database when

IPv6 Commands404ProSafe M4100 and M7100 Managed Switches show ipv6 ospf database database-summaryUse this command to display the number of each type o

IPv6 Commands405 ProSafe M4100 and M7100 Managed SwitchesThe following information only displays if OSPF is initialized on the interface:OSPF Interfac

IPv6 Commands406ProSafe M4100 and M7100 Managed Switches show ipv6 ospf interface statsThis command displays the statistics for a specific interface.

IPv6 Commands407 ProSafe M4100 and M7100 Managed SwitchesSee show ip ospf interface stats on page 297 for a sample output of the number of OSPF packe

IPv6 Commands408ProSafe M4100 and M7100 Managed Switches If you do not specify an IP address, a table with the following columns displays for all neig

IPv6 Commands409 ProSafe M4100 and M7100 Managed Switchesshow ipv6 ospf rangeThis command displays information about the area ranges for the specified

Switching Commands41 ProSafe M4100 and M7100 Managed Switchesshow spanning-tree briefThis command displays spanning tree settings for the bridge. The

IPv6 Commands410ProSafe M4100 and M7100 Managed Switches show ipv6 ospf virtual-link This command displays the OSPF Virtual Interface information for

IPv6 Commands411 ProSafe M4100 and M7100 Managed SwitchesOSPFv3 Graceful Restart CommandsThe managed switch implementation of OSPFv3 supports graceful

IPv6 Commands412ProSafe M4100 and M7100 Managed Switches The grace LSA announcing the graceful restart includes the reason for the restart. Reasons 1

IPv6 Commands413 ProSafe M4100 and M7100 Managed Switchesno nsf [ietf] helper strict-lsa-checking (OSPFv3)This command allows OSPF to continue as a he

IPv6 Commands414ProSafe M4100 and M7100 Managed Switches ipv6 dhcp server Use this command to configure DHCPv6 server functionality on an interface. T

IPv6 Commands415 ProSafe M4100 and M7100 Managed SwitchesThese pools are shared between multiple interfaces over which DHCPv6 server capabilities are

IPv6 Commands416ProSafe M4100 and M7100 Managed Switches prefix-delegation (IPv6)Multiple IPv6 prefixes can be defined within a pool for distributing

IPv6 Commands417 ProSafe M4100 and M7100 Managed SwitchesTerm DefinitionDHCPv6 Solicit Packets ReceivedNumber of solicit received statistics.DHCPv6 Re

IPv6 Commands418ProSafe M4100 and M7100 Managed Switches show ipv6 dhcp interfaceThis command displays DHCPv6 information for all relevant interfaces

IPv6 Commands419 ProSafe M4100 and M7100 Managed Switchesshow ipv6 dhcp poolThis command displays configured DHCP pool.Format show ipv6 dhcp pool <

Switching Commands42ProSafe M4100 and M7100 Managed Switches show spanning-tree interfaceThis command displays the settings and parameters for a speci

IPv6 Commands420ProSafe M4100 and M7100 Managed Switches Valid LifetimeValid lifetime in seconds for delegated prefix.Preferred LifetimePreferred life

42177. IPv6 Multicast CommandsThis chapter describes the IPv6 multicast commands available in the managed switch CLI.Note: Some commands described

IPv6 Multicast Commands422ProSafe M4100 and M7100 Managed Switches IPv6 Multicast Forwarder CommandsNote: There is no specific IP multicast enable fo

IPv6 Multicast Commands423 ProSafe M4100 and M7100 Managed Switchesshow ipv6 mroute groupThis command displays the multicast configuration settings sp

IPv6 Multicast Commands424ProSafe M4100 and M7100 Managed Switches If you use the summary parameter, the command displays the following column heading

IPv6 Multicast Commands425 ProSafe M4100 and M7100 Managed Switchesno ipv6 pim (Interface Config)Use this command to set the administrative mode of P

IPv6 Multicast Commands426ProSafe M4100 and M7100 Managed Switches PIM Mode... DenseData Threshold Rate (Kbps)...

IPv6 Multicast Commands427 ProSafe M4100 and M7100 Managed Switches(Switch) #show ipv6 pim interface 0/1Interface...

IPv6 Multicast Commands428ProSafe M4100 and M7100 Managed Switches no ipv6 pim bsr-candidateUse this command to disable the router to announce its can

IPv6 Multicast Commands429 ProSafe M4100 and M7100 Managed Switchesipv6 pim join-prune-intervalUse this command to configure the interface join/prune

Switching Commands43 ProSafe M4100 and M7100 Managed Switchescorresponds to the desired existing multiple spanning tree instance. The <slot/port>

IPv6 Multicast Commands430ProSafe M4100 and M7100 Managed Switches no ipv6 pim rp-candidateUse this command to disable the router to advertise itself

BSR AddressUptimeBSR PriorityHash Mask LengthNext Bootstrap Message InNext Candidate RP advertisement inIPv6 Multicast Commands431 ProSafe M4100 and M

IPv6 Multicast Commands432ProSafe M4100 and M7100 Managed Switches network. In this situation, the 7000 series has an IGMP/MLD Snooping Querier runnin

IPv6 Multicast Commands433 ProSafe M4100 and M7100 Managed Switchessent on that interface. The range for <query-max-response-time> is 0–65,535 m

IPv6 Multicast Commands434ProSafe M4100 and M7100 Managed Switches no ipv6 mld last-member-query-countUse this command to reset the <last-member-qu

IPv6 Multicast Commands435 ProSafe M4100 and M7100 Managed SwitchesThe following table is displayed to indicate all the sources associated with this g

IPv6 Multicast Commands436ProSafe M4100 and M7100 Managed Switches The following information is displayed for each of the interfaces or for only the s

IPv6 Multicast Commands437 ProSafe M4100 and M7100 Managed Switchesshow ipv6 mld trafficUse this command to display MLD statistical information for th

IPv6 Multicast Commands438ProSafe M4100 and M7100 Managed Switches ipv6 mld-proxyUse this command to enable MLD-Proxy on the router. To enable MLD-Pro

IPv6 Multicast Commands439 ProSafe M4100 and M7100 Managed Switchesshow ipv6 mld-proxyUse this command to display a summary of the host interface stat

Switching Commands44ProSafe M4100 and M7100 Managed Switches If you specify 0 (defined as the default CIST ID) as the <mstid>, this command disp

IPv6 Multicast Commands440ProSafe M4100 and M7100 Managed Switches show ipv6 mld-proxy interfaceThis command displays a detailed list of the host inte

IPv6 Multicast Commands441 ProSafe M4100 and M7100 Managed SwitchesExample: The following shows example CLI display output for the command.(Switch) #s

IPv6 Multicast Commands442ProSafe M4100 and M7100 Managed Switches Example: The following shows example CLI display output for the command.(Switch) #s

44388. Quality of Service (QoS) CommandsThis chapter describes the Quality of Service (QoS) commands available in the managed switch CLI. This chapt

Quality of Service (QoS) Commands444ProSafe M4100 and M7100 Managed Switches Class of Service (CoS) CommandsThis section describes the commands you us

Quality of Service (QoS) Commands445 ProSafe M4100 and M7100 Managed Switchesno classofservice ip-dscp-mapping This command maps each IP DSCP value to

Quality of Service (QoS) Commands446ProSafe M4100 and M7100 Managed Switches cos-queue strictThis command activates the strict priority scheduler mode

Quality of Service (QoS) Commands447 ProSafe M4100 and M7100 Managed Switchesrandom-detect exponential weighting-constantUse this command to configure

Quality of Service (QoS) Commands448ProSafe M4100 and M7100 Managed Switches no random-detect queue-parmsUse this command to set the WRED configuratio

Quality of Service (QoS) Commands449 ProSafe M4100 and M7100 Managed Switchesshow classofservice ip-precedence-mappingThis command displays the curren

Switching Commands45 ProSafe M4100 and M7100 Managed Switchesshow spanning-tree mst port summaryThis command displays the settings of one or all ports

Non-IP Traffic ClassUntrusted Traffic ClassQuality of Service (QoS) Commands450ProSafe M4100 and M7100 Managed Switches show interfaces cos-queueThis

Quality of Service (QoS) Commands451 ProSafe M4100 and M7100 Managed Switchesshow interfaces random-detectThis command displays the global WRED settin

Quality of Service (QoS) Commands452ProSafe M4100 and M7100 Managed Switches The following rules apply when you create a DiffServ class:• Each cla

Quality of Service (QoS) Commands453 ProSafe M4100 and M7100 Managed SwitchesThis set of commands consists of class creation/deletion and matching, wi

Quality of Service (QoS) Commands454ProSafe M4100 and M7100 Managed Switches no class-mapThis command eliminates an existing DiffServ class. The <c

Quality of Service (QoS) Commands455 ProSafe M4100 and M7100 Managed Switchesmatch class-mapThis command adds to the specified class definition the se

Quality of Service (QoS) Commands456ProSafe M4100 and M7100 Managed Switches match secondary cosThis command adds to the specified class definition a

Quality of Service (QoS) Commands457 ProSafe M4100 and M7100 Managed Switchesmatch dstip6This command adds to the specified class definition a match c

Quality of Service (QoS) Commands458ProSafe M4100 and M7100 Managed Switches match ip precedenceThis command adds to the specified class definition a

Quality of Service (QoS) Commands459 ProSafe M4100 and M7100 Managed Switchesmatch protocol This command adds to the specified class definition a matc

Switching Commands46ProSafe M4100 and M7100 Managed Switches show spanning-tree mst summaryThis command displays summary information about all multipl

Quality of Service (QoS) Commands460ProSafe M4100 and M7100 Managed Switches parameter specifies an IP address bit mask and must consist of a contiguo

Quality of Service (QoS) Commands461 ProSafe M4100 and M7100 Managed Switchesmatch secondary-vlanThis command adds to the specified class definition a

Quality of Service (QoS) Commands462ProSafe M4100 and M7100 Managed Switches dropThis command specifies that all packets for the associated traffic st

Quality of Service (QoS) Commands463 ProSafe M4100 and M7100 Managed Switchesclass This command creates an instance of a class definition within the s

Quality of Service (QoS) Commands464ProSafe M4100 and M7100 Managed Switches mark cos-as-sec-cosThis command marks outer VLAN tag priority bits of all

Quality of Service (QoS) Commands465 ProSafe M4100 and M7100 Managed Switchespolice-simpleThis command is used to establish the traffic policing style

Quality of Service (QoS) Commands466ProSafe M4100 and M7100 Managed Switches policy-mapThis command establishes a new DiffServ policy. The <policyn

Quality of Service (QoS) Commands467 ProSafe M4100 and M7100 Managed Switchesservice-policyThis command attaches a policy to an interface in the inbou

Quality of Service (QoS) Commands468ProSafe M4100 and M7100 Managed Switches DiffServ Show CommandsUse the DiffServ show commands to display configura

Quality of Service (QoS) Commands469 ProSafe M4100 and M7100 Managed Switchesshow diffservThis command displays the DiffServ General Status Group info

Spanning Tree AdminmodeSpanning Tree VersionBPDU Guard ModeBPDU Filter ModeConfiguration NameConfiguration Revision LevelConfiguration Digest KeyConfi

Quality of Service (QoS) Commands470ProSafe M4100 and M7100 Managed Switches The following information is repeated for each class associated with this

Quality of Service (QoS) Commands471 ProSafe M4100 and M7100 Managed SwitchesIf the Policy Name is not specified this command displays a list of all d

DiffServ Admin ModeQuality of Service (QoS) Commands472ProSafe M4100 and M7100 Managed Switches The following information is repeated for interface an

Quality of Service (QoS) Commands473 ProSafe M4100 and M7100 Managed Switchesshow service-policyThis command displays a summary of policy-oriented sta

Quality of Service (QoS) Commands474ProSafe M4100 and M7100 Managed Switches no mac access-list extended This command deletes a MAC ACL identified by

Quality of Service (QoS) Commands475 ProSafe M4100 and M7100 Managed Switchesibmsna, ipv4, ipv6, ipx, mplsmcast, mplsucast, netbios, novell, pppoe, ra

Quality of Service (QoS) Commands476ProSafe M4100 and M7100 Managed Switches mac access-group This command either attaches a specific MAC access contr

Quality of Service (QoS) Commands477 ProSafe M4100 and M7100 Managed Switchesno mac access-group This command removes a MAC ACL identified by <name

Quality of Service (QoS) Commands478ProSafe M4100 and M7100 Managed Switches IP Access Control List (ACL) CommandsThis section describes the commands

Quality of Service (QoS) Commands479 ProSafe M4100 and M7100 Managed Switchesno access-listThis command deletes an IP ACL that is identified by the pa

Switching Commands48ProSafe M4100 and M7100 Managed Switches vlan databaseThis command gives you access to the VLAN Config mode, which allows you to c

Quality of Service (QoS) Commands480ProSafe M4100 and M7100 Managed Switches If an IP ACL by this name exists, this command enters IPv4-Access_List co

Quality of Service (QoS) Commands481 ProSafe M4100 and M7100 Managed SwitchesNote: The mirror parameter allows traffic matching this rule to be copie

Quality of Service (QoS) Commands482ProSafe M4100 and M7100 Managed Switches number indicates higher precedence order. If a sequence number is already

Quality of Service (QoS) Commands483 ProSafe M4100 and M7100 Managed Switchesshow ip access-listsThis command displays an IP ACL <accesslistnumber&

Quality of Service (QoS) Commands484ProSafe M4100 and M7100 Managed Switches show access-listsThis command displays IP ACLs, IPv6 ACLs, and MAC access

Quality of Service (QoS) Commands485 ProSafe M4100 and M7100 Managed Switchesno ipv6 access-listThis command deletes the IPv6 ACL identified by <na

Quality of Service (QoS) Commands486ProSafe M4100 and M7100 Managed Switches number of user configurable queues available for the hardware platform. T

Quality of Service (QoS) Commands487 ProSafe M4100 and M7100 Managed Switchesno ipv6 traffic-filterThis command removes an IPv6 ACL identified by <

Quality of Service (QoS) Commands488ProSafe M4100 and M7100 Managed Switches Time Range Commands for Time-Based ACLsTime-based ACLs allow one or more

Quality of Service (QoS) Commands489 ProSafe M4100 and M7100 Managed Switchestime zone. The [start time date] parameters indicate the time and date at

Switching Commands49 ProSafe M4100 and M7100 Managed Switchesvlan acceptframeThis command sets the frame acceptance mode per interface. For VLAN Only

Quality of Service (QoS) Commands490ProSafe M4100 and M7100 Managed Switches no periodicUse this command to delete a periodic time entry from a time r

Quality of Service (QoS) Commands491 ProSafe M4100 and M7100 Managed SwitchesIn a VoIP system, various signaling protocols are used to establish the c

Quality of Service (QoS) Commands492ProSafe M4100 and M7100 Managed Switches no auto-voip oui This command is to delete already configured OUI.Format

Quality of Service (QoS) Commands493 ProSafe M4100 and M7100 Managed SwitchesNote: The administrator has to enable tagging on auto-VoIP-enabled ports

Quality of Service (QoS) Commands494ProSafe M4100 and M7100 Managed Switches Interface Auto VoIP Operational StatusMode--------- --------------

Quality of Service (QoS) Commands495 ProSafe M4100 and M7100 Managed Switches• Detecting the establishment and termination of iSCSI sessions and conne

Quality of Service (QoS) Commands496ProSafe M4100 and M7100 Managed Switches also choose to use these {unreserved} ports). When a port is already def

Quality of Service (QoS) Commands497 ProSafe M4100 and M7100 Managed SwitchesNote: SCSI flows are assigned by default to the highest VPT/DSCP mapped

Quality of Service (QoS) Commands498ProSafe M4100 and M7100 Managed Switches • When aging time is increased - Current sessions will be timed out accor

Quality of Service (QoS) Commands499 ProSafe M4100 and M7100 Managed Switchesshow iscsi sessionsThe show iscsi sessions Privileged EXEC mode command d

5ProSafe M4100 and M7100 Managed SwitchesChapter 6 IPv6 CommandsTunnel Interface Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Switching Commands50ProSafe M4100 and M7100 Managed Switches vlan makestaticThis command changes a dynamically created VLAN (one that is created by GV

Quality of Service (QoS) Commands500ProSafe M4100 and M7100 Managed Switches Time for aging out: 2 minISID: 22Initiator Initiator Target Target IP add

50199. Power over Ethernet (PoE) CommandsThis chapter contains the following sections:• About PoE • PoE Commands About PoEPower over Etherne

Power over Ethernet (PoE) Commands502ProSafe M4100 and M7100 Managed Switches PoE CommandspoeUse this command to enable the Power over Ethernet (PoE)

Power over Ethernet (PoE) Commands503 ProSafe M4100 and M7100 Managed Switchesno poe detectionUse this command to set the detection mode to the defaul

Power over Ethernet (PoE) Commands504ProSafe M4100 and M7100 Managed Switches • user-defined—Allows you to define the maximum power to the port. T

Power over Ethernet (PoE) Commands505 ProSafe M4100 and M7100 Managed SwitchesDynamic Power ManagementAvailable power = 300 watts - 3 watts = 297 watt

Power over Ethernet (PoE) Commands506ProSafe M4100 and M7100 Managed Switches this command takes effect only once after it is executed and cannot be s

Power over Ethernet (PoE) Commands507 ProSafe M4100 and M7100 Managed Switchesno poe timer schedule nameUse this command to detach the schedule from t

Power over Ethernet (PoE) Commands508ProSafe M4100 and M7100 Managed Switches no poe trapsUse this command to disable logging the PoE traps.show poeUs

Power over Ethernet (PoE) Commands509 ProSafe M4100 and M7100 Managed SwitchesExample:(switch) #show poeFirmware Version...

Switching Commands51 ProSafe M4100 and M7100 Managed Switchesvlan participation allThis command configures the degree of participation for all interfa

Power over Ethernet (PoE) Commands510ProSafe M4100 and M7100 Managed Switches show poe port infoUse this command to get information about the status o

Power over Ethernet (PoE) Commands511 ProSafe M4100 and M7100 Managed Switches High Max Output OutputIntf Power

5121010. Utility CommandsThis chapter describes the utility commands available in the CLI. This chapter contains the following sections:• Auto I

Utility Commands513 ProSafe M4100 and M7100 Managed SwitchesAuto Install CommandsThis section describes the Auto Install Commands. Auto Install is a s

Utility Commands514ProSafe M4100 and M7100 Managed Switches boot host auto-saveThis command is used to enable automatically saving the downloaded conf

Utility Commands515 ProSafe M4100 and M7100 Managed Switchesno boot host retry-countThis command is used to reset the number to the default. The defau

Utility Commands516ProSafe M4100 and M7100 Managed Switches deleteThis command deletes the supplied image file from the permanent storage. The image t

Utility Commands517 ProSafe M4100 and M7100 Managed Switchesupdate bootcodeThis command updates the bootcode (boot loader) on the switch. The bootcode

Utility Commands518ProSafe M4100 and M7100 Managed Switches Note: Event log information is retained across a switch reset.show hardwareThis command d

Utility Commands519 ProSafe M4100 and M7100 Managed Switchesshow interface This command displays a summary of statistics for a specific interface or a

Switching Commands52ProSafe M4100 and M7100 Managed Switches assigned the value of the interface VLAN ID for this port. With either option, VLAN tagge

Utility Commands520ProSafe M4100 and M7100 Managed Switches The display parameters, when the argument is “switchport” are as follows:Packets Received

Utility Commands521 ProSafe M4100 and M7100 Managed Switchesshow interface ethernetThis command displays detailed statistics for a specific interface

Utility Commands522ProSafe M4100 and M7100 Managed Switches (cont) • Packets RX and TX 65–127 Octets - The total number of packets (including bad pack

Utility Commands523 ProSafe M4100 and M7100 Managed SwitchesPackets Received with MAC Errors• Total Packets Received with MAC Errors - The total numbe

Utility Commands524ProSafe M4100 and M7100 Managed Switches Packets Transmitted Octets• Total Packets Transmitted (Octets) - The total number of octet

Utility Commands525 ProSafe M4100 and M7100 Managed SwitchesTransmit Discards • Total Transmit Packets Discards - The sum of single collision frames d

Utility Commands526ProSafe M4100 and M7100 Managed Switches If you use the switchport keyword, the following information appears.Term DefinitionOctets

Utility Commands527 ProSafe M4100 and M7100 Managed Switchesshow mac-addr-tableThis command displays the forwarding database entries. These entries ar

Utility Commands528ProSafe M4100 and M7100 Managed Switches If you enter the interface <slot/port> parameter, in addition to the MAC Address and

Utility Commands529 ProSafe M4100 and M7100 Managed Switchesfalling utilization threshold is optional. If the falling CPU utilization parameters are n

Switching Commands53 ProSafe M4100 and M7100 Managed Switchesvlan port tagging allThis command configures the tagging behavior for all interfaces in a

Utility Commands530ProSafe M4100 and M7100 Managed Switches bcmCNTR.0 0.20% bcmLINK.0

Utility Commands531 ProSafe M4100 and M7100 Managed SwitchesNote: If you issue the show running-config command from a serial connection, access to th

Switch DescriptionSystem NameSystem LocationSystem ContactSystem Object IDSystem Up TimeMIBs SupportedUtility Commands532ProSafe M4100 and M7100 Manag

Utility Commands533 ProSafe M4100 and M7100 Managed Switcheslength Use this command to set the pagination length to value number of lines for the sess

Utility Commands534ProSafe M4100 and M7100 Managed Switches memory free low-watermark processorUse this command to get notifications when the CPU free

Utility Commands535 ProSafe M4100 and M7100 Managed Switcheslogging buffered wrapThis command enables wrapping of in-memory logging when the log file

Utility Commands536ProSafe M4100 and M7100 Managed Switches no logging consoleThis command disables logging to the console.Format no logging consoleMo

Utility Commands537 ProSafe M4100 and M7100 Managed Switchesno logging syslogThis command disables syslog logging.Format no logging syslogModelogging

Utility Commands538ProSafe M4100 and M7100 Managed Switches show logging bufferedThis command displays buffered logging (system startup and system ope

Number of Traps Since Last ResetTrap Log CapacityNumber of Traps Since Log Last ViewedLogSystem Time UpTrapUtility Commands539 ProSafe M4100 and M7100

Switching Commands54ProSafe M4100 and M7100 Managed Switches no vlan protocol group nameThis command removes the name from a protocol-based VLAN group

Utility Commands540ProSafe M4100 and M7100 Managed Switches no logging emailThis command disables email alerting.Format no logging emailModelogging em

Utility Commands541 ProSafe M4100 and M7100 Managed Switchesno logging email message-type to-addrThis command removes the configured to-addr field of

Utility Commands542ProSafe M4100 and M7100 Managed Switches logging email logtimeThis command configures how frequently non-urgent email messages are

Utility Commands543 ProSafe M4100 and M7100 Managed Switchesshow logging email config This command displays information about the email alert configur

Utility Commands544ProSafe M4100 and M7100 Managed Switches clear logging email statisticsThis command resets the email alerting statistics.Format cle

Utility Commands545 ProSafe M4100 and M7100 Managed SwitchesportUse this command to configure the TCP port to use for communication with the SMTP serv

Utility Commands546ProSafe M4100 and M7100 Managed Switches System Utility and Clear CommandsThis section describes the commands you use to help troub

Utility Commands547 ProSafe M4100 and M7100 Managed SwitchesThe following are examples of the CLI command.traceroute Success:(Switch) # traceroute 10.

Utility Commands548ProSafe M4100 and M7100 Managed Switches of the traceroute. This port should be an unused port on the destination system. The range

Utility Commands549 ProSafe M4100 and M7100 Managed Switchesclear countersThis command clears the statistics for a specified <slot/port>, for al

Switching Commands55 ProSafe M4100 and M7100 Managed Switchesno protocol groupThis command removes the <vlanid> from this protocol-based VLAN gr

Utility Commands550ProSafe M4100 and M7100 Managed Switches enable passwordThis command prompts you to change the Privileged EXEC password. Passwords

Utility Commands551 ProSafe M4100 and M7100 Managed SwitchesUsing the options described below, you can specify the number and size of Echo Requests an

Utility Commands552ProSafe M4100 and M7100 Managed Switches command, configure the switch for network (in-band) connection. The source and target devi

Utility Commands553 ProSafe M4100 and M7100 Managed SwitchesquitThis command closes the current telnet connection or resets the current serial connect

Utility Commands554ProSafe M4100 and M7100 Managed Switches In the copy url ias-users command, for url, use one of the following for the IAS user&apos

Utility Commands555 ProSafe M4100 and M7100 Managed Switchesnvram:traplog <url> Copies the trap log file to a server.system:running-config nvram

Utility Commands556ProSafe M4100 and M7100 Managed Switches write memoryUse this command to save running configuration changes to NVRAM so that the ch

Utility Commands557 ProSafe M4100 and M7100 Managed Switchessntp client modeThis command enables Simple Network Time Protocol (SNTP) client mode and m

Utility Commands558ProSafe M4100 and M7100 Managed Switches no sntp unicast client poll-intervalThis command resets the poll interval for SNTP unicast

Utility Commands559 ProSafe M4100 and M7100 Managed Switchessntp serverThis command configures an SNTP server (a maximum of three). The optional prior

Switching Commands56ProSafe M4100 and M7100 Managed Switches no protocol vlan group allThis command removes all interfaces from this protocol-based VL

Utility Commands560ProSafe M4100 and M7100 Managed Switches clock setThis command sets the system time and date. Format clock set <hh:mm:ss>cloc

Utility Commands561 ProSafe M4100 and M7100 Managed Switches• offset—Number of minutes to add during the summertime. (Range:1-1440)• acronym—T

Utility Commands562ProSafe M4100 and M7100 Managed Switches show sntp clientThis command is used to display SNTP client settings.Format show sntp clie

Utility Commands563 ProSafe M4100 and M7100 Managed SwitchesFor each configured server: Host AddressAddress TypePriorityVersionPortLast Attempt TimeLa

Utility Commands564ProSafe M4100 and M7100 Managed Switches DHCP Server CommandsThis section describes the commands you to configure the DHCP server s

Utility Commands565 ProSafe M4100 and M7100 Managed Switchesclient-nameThis command specifies the name for a DHCP client. Name is a string consisting

Utility Commands566ProSafe M4100 and M7100 Managed Switches no dns-serverThis command removes the DNS Server list. Format no dns-server Modehardware-a

Utility Commands567 ProSafe M4100 and M7100 Managed SwitchesleaseThis command configures the duration of the lease for an IP address that is assigned

Utility Commands568ProSafe M4100 and M7100 Managed Switches no bootfileThis command deletes the boot image name.Format no bootfileModedomain-nameThis

Utility Commands569 ProSafe M4100 and M7100 Managed Switchesnetbios-node-typeThe command configures the NetBIOS node type for Microsoft Dynamic Host C

Switching Commands57 ProSafe M4100 and M7100 Managed Switchesvlan association subnetThis command associates a VLAN to a specific IP-subnet.Format vlan

Utility Commands570ProSafe M4100 and M7100 Managed Switches period (for example, a3.4f.22.0c), colon (for example, a3:4f:22:0c), or white space (for e

Utility Commands571 ProSafe M4100 and M7100 Managed Switchesno ip dhcp ping packetsThis command prevents the server from pinging pool addresses and se

Utility Commands572ProSafe M4100 and M7100 Managed Switches ip dhcp conflict loggingThis command enables conflict logging on DHCP server.DefaultFormat

Utility Commands573 ProSafe M4100 and M7100 Managed Switchesshow ip dhcp bindingThis command displays address bindings for the specific IP address on

Pool NamePool TypeLease TimeDNS ServersDefault RoutersUtility Commands574ProSafe M4100 and M7100 Managed Switches The following additional field is di

Utility Commands575 ProSafe M4100 and M7100 Managed SwitchesMessage Received:DHCP DISCOVERDHCP REQUESTDHCP DECLINEDHCP RELEASEDHCP INFORMMessage Sent:

Utility Commands576ProSafe M4100 and M7100 Managed Switches ip domain lookupUse this command to enable the DNS client.DefaultFormat ip domain lookupMo

Utility Commands577 ProSafe M4100 and M7100 Managed Switchesname command, is used only when the default domain name list is empty. A maximum of 32 nam

Utility Commands578ProSafe M4100 and M7100 Managed Switches no ip hostUse this command to remove the name-to-address mapping.Format no ip host <nam

Utility Commands579 ProSafe M4100 and M7100 Managed Switchesip domain timeoutUse this command to specify the amount of time to wait for a response to

Switching Commands58ProSafe M4100 and M7100 Managed Switches show vlan <vlanid>This command displays detailed information, including interface i

Utility Commands580ProSafe M4100 and M7100 Managed Switches Example: The following shows example CLI display output for the command.<Switch> sho

Utility Commands581 ProSafe M4100 and M7100 Managed Switchespackets are captured and capturing packets is stopped automatically.The packet capture ope

Utility Commands582ProSafe M4100 and M7100 Managed Switches no capture Use this command to reset the capture mode to remote mode.Format no captureMode

Utility Commands583 ProSafe M4100 and M7100 Managed Switchesdisplayed during the capturing session. When capturing is in progress, unsaved, not-yet-di

Utility Commands584ProSafe M4100 and M7100 Managed Switches no debug arpUse this command to disable ARP debug protocol messages.Format no debug arpMod

Utility Commands585 ProSafe M4100 and M7100 Managed Switchesno debug consoleThis command disables the display of “debug” trace output on the login ses

Utility Commands586ProSafe M4100 and M7100 Managed Switches debug dhcp packet Use this command to display “debug” information about DHCPv4 client acti

Utility Commands587 ProSafe M4100 and M7100 Managed Switchesno debug igmpsnooping packetThis command disables tracing of IGMP Snooping packets.Format

Utility Commands588ProSafe M4100 and M7100 Managed Switches no debug igmpsnooping transmitThis command disables tracing of transmitted IGMP snooping p

Utility Commands589 ProSafe M4100 and M7100 Managed Switchesno debug igmpsnooping receiveThis command disables tracing of received IGMP Snooping packe

Switching Commands59 ProSafe M4100 and M7100 Managed Switchesshow vlan briefThis command displays a list of all configured VLANs.Format show vlan brie

Utility Commands590ProSafe M4100 and M7100 Managed Switches no debug ip dvmrp packetUse this command to disable debug tracing of DVMRP packet receptio

Utility Commands591 ProSafe M4100 and M7100 Managed Switchesdebug ip pimdm packetUse this command to trace PIMDM packet reception and transmission. re

Utility Commands592ProSafe M4100 and M7100 Managed Switches no debug ip vrrpUse this command to disable VRRP debug protocol messages.Format no debug i

Utility Commands593 ProSafe M4100 and M7100 Managed Switchesdebug ipv6 mld packetUse this command to trace MLDv6 packet reception and transmission. re

Utility Commands594ProSafe M4100 and M7100 Managed Switches no debug ipv6 pimsm packetUse this command to disable debug tracing of PIMSMv6 packet rece

Utility Commands595 ProSafe M4100 and M7100 Managed Switchesno debug mldsnooping packetUse this command to disable debug tracing of MLD snooping packe

Utility Commands596ProSafe M4100 and M7100 Managed Switches The remaining fields in the trace are specific to the type of OSPF Packet.HELLO packet fie

Utility Commands597 ProSafe M4100 and M7100 Managed SwitchesLS_ACK packet field definitions.Lengthno debug ospf packetThis command disables tracing of

Utility Commands598ProSafe M4100 and M7100 Managed Switches The following parameters are displayed in the trace message:TX/RXIntfSRC_IPDEST_IPTypeno d

Utility Commands599 ProSafe M4100 and M7100 Managed SwitchesThe following parameters are displayed in the trace message:TX/RXIntfSrc_IP Dest_IPRip_Ver

6ProSafe M4100 and M7100 Managed SwitchesSoftware License Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .609IP Address Con

Switching Commands60ProSafe M4100 and M7100 Managed Switches show vlan association subnet This command displays the VLAN associated with a specific co

Utility Commands600ProSafe M4100 and M7100 Managed Switches debug spanning-tree bpduThis command enables tracing of spanning tree BPDUs received and t

Utility Commands601 ProSafe M4100 and M7100 Managed Switchesno debug spanning-tree bpdu receiveThis command disables tracing of received spanning tree

Utility Commands602ProSafe M4100 and M7100 Managed Switches debug udld packetThis command enables debugging on the received and transmitted UDLD PDU’s

Utility Commands603 ProSafe M4100 and M7100 Managed Switchesdebug aaa accountingThis command is useful for debugging accounting configuration and func

Utility Commands604ProSafe M4100 and M7100 Managed Switches cablestatusThis command returns the status of the specified port.Format cablestatus <sl

Utility Commands605 ProSafe M4100 and M7100 Managed Switchesno sflow receiverUse this command to set the sFlow collector parameters back to the defaul

Utility Commands606ProSafe M4100 and M7100 Managed Switches no sflow samplerUse this command to reset the sFlow sampler instance to the default settin

Utility Commands607 ProSafe M4100 and M7100 Managed Switchesshow sflow agentThe sFlow agent collects time-based sampling of network interface statisti

Utility Commands608ProSafe M4100 and M7100 Managed Switches show sflow receiversUse this command to display configuration information related to the s

Utility Commands609 ProSafe M4100 and M7100 Managed SwitchesSoftware License CommandsLicense commands allow you to configure advanced features on some

Switching Commands61 ProSafe M4100 and M7100 Managed Switchesdvlan-tunnel ethertypeThis command configures the ether-type for all interfaces. The ethe

Utility Commands610ProSafe M4100 and M7100 Managed Switches (Managed Switches) #show license featuresThis command displays the features that are licen

Utility Commands611 ProSafe M4100 and M7100 Managed Switchesclear ip address-conflict-detectThis command clears the detected address conflict status i

Utility Commands612ProSafe M4100 and M7100 Managed Switches show llpf interface allUse this command to display the status of LLPF rules configured on

Utility Commands613 ProSafe M4100 and M7100 Managed Switches• Group 9 - EventControls the actions that are taken when an event occurs. RMON events occ

Utility Commands614ProSafe M4100 and M7100 Managed Switches no rmon alarmThis command deletes the rmon alarm entry.Format no rmon alarm <alarm numb

Utility Commands615 ProSafe M4100 and M7100 Managed Switchesno rmon hcalarmThis command deletes the rmon hcalarm entry.Format no rmon hcalarm <alar

Utility Commands616ProSafe M4100 and M7100 Managed Switches rmon collection historyThis command sets the history control parameters of the RMON histor

Utility Commands617 ProSafe M4100 and M7100 Managed Switchesshow rmon historyThis command displays the specified entry in the RMON history table.Forma

Utility Commands618ProSafe M4100 and M7100 Managed Switches show rmon {hcalarms | hcalarm <alarm index>}This command displays the entries in the

Utility Commands619 ProSafe M4100 and M7100 Managed Switchesudld timeout intervalThis command configures the time interval after which UDLD link is co

Switching Commands62ProSafe M4100 and M7100 Managed Switches no mode dvlan-tunnelThis command is used to disable Double VLAN Tunneling on the specifie

Utility Commands620ProSafe M4100 and M7100 Managed Switches show udld This command displays the global settings of UDLD.Format show udldModeAdmin Mode

Utility Commands621 ProSafe M4100 and M7100 Managed Switchesshow usb deviceThis command displays USB flash device details.Format show USB deviceModeDe

FilenameFilesizeTotal SizeBytes UsedBytes FreeUtility Commands622ProSafe M4100 and M7100 Managed Switches Example:(switch) #dir USB:Filename Filesize

6231111. Management CommandsThis chapter describes the management commands available in the managed switch CLI.This chapter contains the following s

Management Commands624ProSafe M4100 and M7100 Managed Switches Configuring the Switch Management CPUTo manage the switch via the web GUI or telnet, an

Management Commands625 ProSafe M4100 and M7100 Managed SwitchesThe following is an example of an ezconfig session.NETGEAR EZ Configuration Utility----

Management Commands626ProSafe M4100 and M7100 Managed Switches Network Interface CommandsThis section describes the commands you use to configure a lo

Management Commands627 ProSafe M4100 and M7100 Managed SwitchesA locally administered address must have bit 6 On (b'1') and bit 7 Off (b&apo

Management Commands628ProSafe M4100 and M7100 Managed Switches the switch's network interface do not affect the configuration of the front panel

Management Commands629 ProSafe M4100 and M7100 Managed SwitchesIPv6 Address/Length is ... 3099::210:18FF:FE82:337/64IPv6 Default

Switching Commands63 ProSafe M4100 and M7100 Managed SwitchesVoice VLAN CommandsThis section describes the commands you use for Voice VLAN. Voice VLAN

Management Commands630ProSafe M4100 and M7100 Managed Switches no serial baudrateUse this command to set the communication rate of the terminal interf

Management Commands631 ProSafe M4100 and M7100 Managed Switchesenable authenticationUse this command in line configuration mode to specify an authenti

Management Commands632ProSafe M4100 and M7100 Managed Switches ip telnet server enableUse this command to enable Telnet connections to the system and

Management Commands633 ProSafe M4100 and M7100 Managed Switchesno transport input telnetUse this command to prevent new Telnet sessions from being est

Management Commands634ProSafe M4100 and M7100 Managed Switches no session-limitUse this command to set the maximum number of simultaneous outbound Tel

Management Commands635 ProSafe M4100 and M7100 Managed Switchestelnetcon timeoutUse this command to set the Telnet connection session timeout value, i

Outbound Telnet Login TimeoutMaximum Number of Outbound Telnet SessionsAllow New Outbound Telnet SessionsManagement Commands636ProSafe M4100 and M7100

Management Commands637 ProSafe M4100 and M7100 Managed Switchesip sshUse this command to enable SSH access to the system. (This command is the short f

Management Commands638ProSafe M4100 and M7100 Managed Switches no sshcon maxsessionsUse this command to set the maximum number of allowed SSH connecti

Management Commands639 ProSafe M4100 and M7100 Managed SwitchesManagement Security CommandsThis section describes commands you use to generate keys an

Switching Commands64ProSafe M4100 and M7100 Managed Switches You can configure Voice VLAN in any of the following ways:vlan-iddot1pnoneuntaggedno voic

Management Commands640ProSafe M4100 and M7100 Managed Switches no crypto key generate rsaUse this command to delete the RSA key files from the device.

Management Commands641 ProSafe M4100 and M7100 Managed Switchesno ip http serverUse this command to disable access to the switch through the Web inter

Management Commands642ProSafe M4100 and M7100 Managed Switches user will be forced to reauthenticate. This timer begins on initiation of the web sessi

Management Commands643 ProSafe M4100 and M7100 Managed Switchesip http session maxsessionsUse this command to limit the number of allowable unsecure H

Management Commands644ProSafe M4100 and M7100 Managed Switches no ip http secure-session maxsessionsUse this command to restore the number of allowabl

Management Commands645 ProSafe M4100 and M7100 Managed Switchesip https authenticationUse this command to specify the authentication methods for http

Management Commands646ProSafe M4100 and M7100 Managed Switches ip http secure-protocolUse this command to set protocol levels (versions). The protocol

Management Commands647 ProSafe M4100 and M7100 Managed SwitchesAccess CommandsUse the commands in this section to close remote connections or to view

Management Commands648ProSafe M4100 and M7100 Managed Switches usernameUse this command to add a new user to the local user database. The default priv

Management Commands649 ProSafe M4100 and M7100 Managed Switchesusername name nopasswordUse this command to remove an existing user’s password (NULL pa

Switching Commands65 ProSafe M4100 and M7100 Managed SwitchesWhen the interface is specified:Voice VLAN Interface ModeVoice VLAN IDVoice VLAN Priority

Management Commands650ProSafe M4100 and M7100 Managed Switches username snmpv3 authenticationUse this command to specify the authentication protocol t

Management Commands651 ProSafe M4100 and M7100 Managed Switchesno username snmpv3 encryptionUse this command to set the encryption protocol to none. T

Management Commands652ProSafe M4100 and M7100 Managed Switches show users accounts detailThis command displays the local user status about user accoun

Login TimeUsernameProtocolLocationManagement Commands653 ProSafe M4100 and M7100 Managed Switchespasswords min-lengthUse this command to enforce a min

Management Commands654ProSafe M4100 and M7100 Managed Switches passwords agingUse this command to implement aging on passwords for local users. When a

Management Commands655 ProSafe M4100 and M7100 Managed Switchesno passwords strength-checkUse this command to disable the password strength-check.Form

Management Commands656ProSafe M4100 and M7100 Managed Switches passwords strength minimum numeric-charactersUse this command to enforce a minimum numb

Management Commands657 ProSafe M4100 and M7100 Managed Switchesno passwords strength maximum consecutive-charactersUse this command to reset the maxim

Management Commands658ProSafe M4100 and M7100 Managed Switches passwords strength exclude-keywordUse this command to exclude the specified keyword whi

Management Commands659 ProSafe M4100 and M7100 Managed Switchesshow passwords resultUse this command to display the last password set result informati

Switching Commands66ProSafe M4100 and M7100 Managed Switches If an interface is configured as a protected port, and you add that interface to a Port C

Management Commands660ProSafe M4100 and M7100 Managed Switches list-name Character string used to name the list of authentication methods activated

Management Commands661 ProSafe M4100 and M7100 Managed SwitchesDefault Uses the listed authentication methods that follow this argument as the defau

Management Commands662ProSafe M4100 and M7100 Managed Switches specified as an authentication method after radius, no authentication is used if the ra

execcommandsdefaultlist-namestart-stopstop-onlynonemethod (method1/method2…)Management Commands663 ProSafe M4100 and M7100 Managed Switchesno aaa acco

Management Commands664ProSafe M4100 and M7100 Managed Switches ip http/https accountingThis command applies user exec accounting list to the line meth

Management Commands665 ProSafe M4100 and M7100 Managed SwitchesExample:(switch) #(switch) #show accounting methodsAcct Type Method Name Record

Management Commands666ProSafe M4100 and M7100 Managed Switches no aaa authorizationThis command deletes the authorization method list.Format no aaa au

Management Commands667 ProSafe M4100 and M7100 Managed Switches---------------------------- ------------------------------dfltExecAuthList

Management Commands668ProSafe M4100 and M7100 Managed Switches no domain-name enableThis command disables the domain name functionality. Format no dom

Management Commands669 ProSafe M4100 and M7100 Managed Switchesaaa session-idThis global aaa command specifies whether the same session-id is used for

Switching Commands67 ProSafe M4100 and M7100 Managed Switchesno switchport protected (Interface Config)Use this command to configure a port as unprote

Management Commands670ProSafe M4100 and M7100 Managed Switches clear aaa ias-usersUse this command to remove all users from the IAS database.Format cl

Management Commands671 ProSafe M4100 and M7100 Managed Switchesno snmp-server community Use this command to remove this community name from the table.

Management Commands672ProSafe M4100 and M7100 Managed Switches station, and will use that machine's IP address for the client IP address. A value

Management Commands673 ProSafe M4100 and M7100 Managed Switchessnmp-server community roUse this command to restrict access to switch information. The

Management Commands674ProSafe M4100 and M7100 Managed Switches no snmp-server enable trapsUse this command to disable the Authentication Flag.Format n

Management Commands675 ProSafe M4100 and M7100 Managed Switchesno snmp-server enable traps multiusersUse this command to disable Multiple User traps.

Management Commands676ProSafe M4100 and M7100 Managed Switches no snmptrap Use this command to delete trap receivers for a community. Format no snmptr

Management Commands677 ProSafe M4100 and M7100 Managed Switchessnmptrap modeUse this command to activate or deactivate an SNMP trap. Enabled trap rece

Management Commands678ProSafe M4100 and M7100 Managed Switches snmp trap link-status allUse this command to enable link status traps for all interface

Management Commands679 ProSafe M4100 and M7100 Managed SwitchesTCP/IP to an external SNMP manager based on the SNMP configuration (the trap receiver a

Switching Commands68ProSafe M4100 and M7100 Managed Switches Private VLANThe Private VLANs feature separates a regular VLAN domain into two or more su

Management Commands680ProSafe M4100 and M7100 Managed Switches Community Name IpAddress IPv6 Address Snmp Version Mode Mytrap

Management Commands681 ProSafe M4100 and M7100 Managed Switchesauthorization network radiusUse this command to enable the switch to accept VLAN assign

Management Commands682ProSafe M4100 and M7100 Managed Switches no radius server attributeUse the no version of this command to disable the NAS-IP-Addr

Management Commands683 ProSafe M4100 and M7100 Managed SwitchesNote: To reconfigure a RADIUS accounting server to use the default UDP <port>, s

Management Commands684ProSafe M4100 and M7100 Managed Switches radius server keyUse this command to configure the key to be used in RADIUS client comm

Management Commands685 ProSafe M4100 and M7100 Managed Switchesno radius server msgauthUse the no version of this command to disable the message authe

Management Commands686ProSafe M4100 and M7100 Managed Switches no radius server retransmitUse this command to set the value of this global parameter t

Number of Configured Authentication ServersNumber of Configured Accounting ServersNumber of Named Authentication Server GroupsNumber of Named Accounti

Management Commands688ProSafe M4100 and M7100 Managed Switches The following shows example CLI display output for the command.(Switch) #show radius se

Management Commands689 ProSafe M4100 and M7100 Managed Switches192.168.37.201 Network2_RADIUS_Server Primary192.168.37.202

host-associationmappingprimary-vlan-idsecondary-vlan-idaddremovesecondary-vlan-listSwitching Commands69 ProSafe M4100 and M7100 Managed Switchesno swi

Management Commands690ProSafe M4100 and M7100 Managed Switches The following shows example CLI display output for the command.(Switch) #show radius ac

Management Commands691 ProSafe M4100 and M7100 Managed SwitchesThe following shows example CLI display output for the command.(Switch) #show radius ac

Management Commands692ProSafe M4100 and M7100 Managed Switches Malformed Responses... 0Bad Authenticators...

Management Commands693 ProSafe M4100 and M7100 Managed SwitchesThe following shows example CLI display output for the command.(Switch) #show radius st

Management Commands694ProSafe M4100 and M7100 Managed Switches debug tacacs packetUse the debug tacacs packet command to turn on TACACS+ packet debug.

Management Commands695 ProSafe M4100 and M7100 Managed Switcheskeyword. In the show running config command’s display, these secret keys are displayed

Management Commands696ProSafe M4100 and M7100 Managed Switches no tacacs-server source interfaceUse this command in Global Configuration mode to remov

Management Commands697 ProSafe M4100 and M7100 Managed SwitchesportUse the port command in TACACS Configuration mode to specify a server port number.

Management Commands698ProSafe M4100 and M7100 Managed Switches Configuration Scripting CommandsConfiguration Scripting allows you to generate text-for

Management Commands699 ProSafe M4100 and M7100 Managed Switches " " hello helloscript applyUse this command to apply

711. Using the Command-Line InterfaceThe command-line interface (CLI) is a text-based way to manage and monitor the system. You can access the CLI b

Switching Commands70ProSafe M4100 and M7100 Managed Switches private-vlanThis command is used to configure the private VLANs and to configure the asso

Management Commands700ProSafe M4100 and M7100 Managed Switches script validateUse this command to validate a script file by parsing each line in the s

Management Commands701 ProSafe M4100 and M7100 Managed Switchesset clibannerUse this command to add the CLI Banner. The banner message supports up to

ipv4-routing dual-ipv4-and-ipv6 Management Commands702ProSafe M4100 and M7100 Managed Switches no sdm prefer Use this command to return to the default

Management Commands703 ProSafe M4100 and M7100 Managed SwitchesExample: #show sdm prefer Current template: Dual IPv4 and IPv6ARP Entries...

Management Commands704ProSafe M4100 and M7100 Managed Switches network ipv6 addressUse this command to configure an IPv6 global address, enable or dis

Management Commands705 ProSafe M4100 and M7100 Managed Switchesno network ipv6 gatewayUse this command to remove IPv6 gateways on the network port int

Management Commands706ProSafe M4100 and M7100 Managed Switches The following example shows CLI display output for the command:(switch)#show network ip

Management Commands707 ProSafe M4100 and M7100 Managed Switchesclear network ipv6 dhcp statisticsUse this command to clear the DHCPv6 statistics on th

7081212. Log MessagesThis chapter lists common log messages, along with information regarding the cause of each message. There is no specific action

Log Messages709 ProSafe M4100 and M7100 Managed SwitchesCoreTable 3. BSP Log Messages Component Message CauseBSPEvent(0xaaaaaaaa) Switch has restart

Private -vlantypePrimarySecondaryTypePortsSwitching Commands71 ProSafe M4100 and M7100 Managed Switchesshow interface ethernet <slot/port > swit

Log Messages710ProSafe M4100 and M7100 Managed Switches Table 5. System Log Messages Component Message CauseSYSTEMConfiguration file Switch CLI.cfg s

Log Messages711 ProSafe M4100 and M7100 Managed SwitchesUtilitiesTable 6. Trap Mgr Log MessageComponent Message CauseTrap MgrLink Up/Down: slot/port

Log Messages712ProSafe M4100 and M7100 Managed Switches Table 9. RADIUS Log Messages Component Message CauseRADIUSRADIUS: Invalid data length - xxx T

Log Messages713 ProSafe M4100 and M7100 Managed SwitchesManagementTable 10. TACACS+ Log Messages Component Message CauseTACACS+TACACS+: authenticatio

Log Messages714ProSafe M4100 and M7100 Managed Switches Table 14. EmWeb Log Messages Component Message CauseEmWebEMWEB (Telnet): Max number of Telnet

Log Messages715 ProSafe M4100 and M7100 Managed SwitchesTable 16. WEB Log MessagesComponent Message CauseWEBMax clients exceeded This message is show

Log Messages716ProSafe M4100 and M7100 Managed Switches SSHDSSHD: Unknown UI event in message, event=XXXXFailed to dispatch the UI event to the approp

Log Messages717 ProSafe M4100 and M7100 Managed SwitchesSwitchingTable 20. User_Manager Log MessagesComponent Message CauseUser_ManagerUser Login Fai

Log Messages718ProSafe M4100 and M7100 Managed Switches Table 22. IP Subnet VLANS Log MessagesComponent Message CauseIPsubnet vlansERROR vlanIpSubnet

Log Messages719 ProSafe M4100 and M7100 Managed SwitchesMac based VLANSvlanMacVlanChangeCallback: Failed to add an entryAppears when a dtl fails to ad

Switching Commands72ProSafe M4100 and M7100 Managed Switches no set garp timer join This command sets the GVRP join time (for one or all ports and per

Log Messages720ProSafe M4100 and M7100 Managed Switches IGMP SnoopingFailed to set igmp mrouter mode %d for interface xxx on VLAN yyyFailed to set VLA

Log Messages721 ProSafe M4100 and M7100 Managed SwitchesTable 27. 802.3ad Log MessagesComponent Message Cause802.3addot3adReceiveMachine: received de

Log Messages722ProSafe M4100 and M7100 Managed Switches Table 32. 802.1Q Log MessagesComponent Message Cause802.1Qdot1qIssueCmd: Unable to send messa

Log Messages723 ProSafe M4100 and M7100 Managed SwitchesQoSTable 35. Protocol-based VLANs Log MessagesComponent Message CauseProtocol Based VLANspbVl

Log Messages724ProSafe M4100 and M7100 Managed Switches Routing/IPv6 RoutingTable 38. DiffServ Log MessagesComponent Message CauseDiffServdiffserv.c

Log Messages725 ProSafe M4100 and M7100 Managed SwitchesOSPFv2Warning: OSPF LSDB is 90% full (22648 LSAs).OSPFv2 limits the number of Link State Adver

Log Messages726ProSafe M4100 and M7100 Managed Switches Table 42. Routing Table Manager Log Messages Component Message CauseRouting Table ManagerRTO

Log Messages727 ProSafe M4100 and M7100 Managed SwitchesMulticastTable 45. RIP Log MessageComponent Message CauseRIPRIP : discard response from xxx v

Log Messages728ProSafe M4100 and M7100 Managed Switches Table 49. IGMP-Proxy Log MessagesComponent Message CauseIGMP-ProxyError getting memory for ig

Log Messages729 ProSafe M4100 and M7100 Managed SwitchesStackingTable 51. PIM-DM Log MessagesComponent Message CausePIM-DMOut of memory when creating

Switching Commands73 ProSafe M4100 and M7100 Managed Switchesno set garp timer leaveallThis command sets how frequently Leave All PDUs are generated t

Log Messages730ProSafe M4100 and M7100 Managed Switches TechnologiesTable 54. System General Error MessagesComponent Message CauseOS Invalid USP unit

Log Messages731 ProSafe M4100 and M7100 Managed SwitchesOS USL: A Trunk being created by bcmx already existed in USLPossible synchronization issue bet

Log Messages732ProSafe M4100 and M7100 Managed Switches O/S SupportOS USL: failed to sync L3 Route table on unit=xCould not synchronize unit x due to

Log Messages733 ProSafe M4100 and M7100 Managed SwitchesOSAPI osapiCleanupIf: NetIPGet During the call to remove the interface from the route table, t

7341313. Green Ethernet CommandsNETGEAR Managed Switch Release 10.0.1 supports the following Green Ethernet power saving modes:• Energy Detect M

Green Ethernet Commands735 ProSafe M4100 and M7100 Managed SwitchesEnergy-Detect ModeWhen Energy-Detect mode is enabled, if communication on a port st

Green Ethernet Commands736ProSafe M4100 and M7100 Managed Switches green-mode energy-detectUse this command enables energy-detect mode on an interface

Green Ethernet Commands737 ProSafe M4100 and M7100 Managed Switchesclear green-mode statisticsThis command to clears the following for a specified <

Green Ethernet Commands738ProSafe M4100 and M7100 Managed Switches EEEEEE Admin Mode EEE Admin Mode is enabled or disabled.Transmit Idle Time It is th

Green Ethernet Commands739 ProSafe M4100 and M7100 Managed SwitchesNote: Executing 'clear green-mode statistics' only clears the EEE Transm

Switching Commands74ProSafe M4100 and M7100 Managed Switches no set gvrp adminmodeThis command disables GVRP.Format no set gvrp adminmodeModeset gvrp

Green Ethernet Commands740ProSafe M4100 and M7100 Managed Switches Cumulative Energy Saving (W * H)... XX Time Since Counters L

Green Ethernet Commands741 ProSafe M4100 and M7100 Managed SwitchesExample:The output of 'show green-mode <u/s/p>' is indicated below.

Green Ethernet Commands742ProSafe M4100 and M7100 Managed Switches Interface Energy-Detect Short-Reach-Config Short-Reach EEE

Green Ethernet Commands743 ProSafe M4100 and M7100 Managed Switchesshow green-mode eee-lpi-history interface <slot/port>This command displays th

7441414. Command Listip vrrp (Global Config) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Command List745 ProSafe M4100 and M7100 Managed Switchesarea virtual-link authentication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Command List746ProSafe M4100 and M7100 Managed Switches classofservice dot1p-mapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Command List747 ProSafe M4100 and M7100 Managed Switchesclear traplog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Command List748ProSafe M4100 and M7100 Managed Switches debug spanning-tree bpdu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Command List749 ProSafe M4100 and M7100 Managed Switchesdos-control tcpoffset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Switching Commands75 ProSafe M4100 and M7100 Managed SwitchesGMRP CommandsThis section describes the commands you use to configure and view GARP Multi

Command List750ProSafe M4100 and M7100 Managed Switches interface lag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Command List751 ProSafe M4100 and M7100 Managed Switchesip http secure-session soft-timeout . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Command List752ProSafe M4100 and M7100 Managed Switches ip pim join-prune-interval . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Command List753 ProSafe M4100 and M7100 Managed Switchesipv6 mld-proxy unsolicit-rprt-interval . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Command List754ProSafe M4100 and M7100 Managed Switches lacp actor port priority . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Command List755 ProSafe M4100 and M7100 Managed Switchesmac access-list extended rename . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Command List756ProSafe M4100 and M7100 Managed Switches netbios-node-type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Command List757 ProSafe M4100 and M7100 Managed Switchespasswords strength minimum lowercase-letters . . . . . . . . . . . . . . . . . . . . . . . . .

Command List758ProSafe M4100 and M7100 Managed Switches protocol vlan group all . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Command List759 ProSafe M4100 and M7100 Managed Switchesset gvrp adminmode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Switching Commands76ProSafe M4100 and M7100 Managed Switches set gmrp interfacemodeThis command enables GARP Multicast Registration Protocol on a sing

Command List760ProSafe M4100 and M7100 Managed Switches show dampening interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Command List761 ProSafe M4100 and M7100 Managed Switchesshow ip dhcp global configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Command List762ProSafe M4100 and M7100 Managed Switches show ip pim bsr-router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Command List763 ProSafe M4100 and M7100 Managed Switchesshow ipv6 ospf range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Command List764ProSafe M4100 and M7100 Managed Switches show mac-address-table multicast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Command List765 ProSafe M4100 and M7100 Managed Switchesshow running-config . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Command List766ProSafe M4100 and M7100 Managed Switches shutdown all . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Command List767 ProSafe M4100 and M7100 Managed Switchessplit-horizon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Command List768ProSafe M4100 and M7100 Managed Switches udld port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Switching Commands77 ProSafe M4100 and M7100 Managed Switchesshow mac-address-table gmrpThis command displays the GMRP entries in the Multicast Forwar

Switching Commands78ProSafe M4100 and M7100 Managed Switches clear dot1x statisticsThis command resets the 802.1x statistics for the specified port or

Switching Commands79 ProSafe M4100 and M7100 Managed Switchesno dot1x guest-vlanThis command disables Guest VLAN on the interface.DefaultFormat no dot

Using the Command-Line Interface8ProSafe M4100 and M7100 Managed Switches Licensing and Command SupportAs shown in the following table, some command g

Switching Commands80ProSafe M4100 and M7100 Managed Switches no dot1x max-reqThis command sets the maximum number of times the authenticator state mac

Switching Commands81 ProSafe M4100 and M7100 Managed Switchesno dot1x port-controlThis command sets the 802.1x port control mode on the specified port

Switching Commands82ProSafe M4100 and M7100 Managed Switches no dot1x re-authenticationThis command disables re-authentication of the supplicant for t

Switching Commands83 ProSafe M4100 and M7100 Managed Switchesno dot1x timeoutThis command sets the value, in seconds, of the timer used by the authent

Switching Commands84ProSafe M4100 and M7100 Managed Switches no dot1x unauthenticated-vlanThis command resets the unauthenticated-vlan associated with

Switching Commands85 ProSafe M4100 and M7100 Managed Switchesno dot1x dynamic-vlan enableUse this command to disable the switch from creating VLANs dy

Switching Commands86ProSafe M4100 and M7100 Managed Switches show authentication methodsThis command displays information about the authentication met

Switching Commands87 ProSafe M4100 and M7100 Managed SwitchesIf you do not use the optional parameters <slot/port> or <vlanid>, the comman

Switching Commands88ProSafe M4100 and M7100 Managed Switches Backend Authentication StateCurrent state of the backend authentication state machine. Po

Switching Commands89 ProSafe M4100 and M7100 Managed SwitchesThe show dot1x detail <slot/port> command will display the following MAC-based dot1

Using the Command-Line Interface9 ProSafe M4100 and M7100 Managed SwitchesCommand SyntaxA command is one or more words that might be followed by one o

Switching Commands90ProSafe M4100 and M7100 Managed Switches show dot1x clientsThis command displays 802.1x client information. This command also disp

Switching Commands91 ProSafe M4100 and M7100 Managed Switchesshow dot1x usersThis command displays 802.1x port security user information for locally c

Switching Commands92ProSafe M4100 and M7100 Managed Switches dot1x supplicant port-controlUse this command to set the ports authorization state (Autho

Switching Commands93 ProSafe M4100 and M7100 Managed Switchesdot1x supplicant timeout start-periodUse this command to configure the start period timer

Switching Commands94ProSafe M4100 and M7100 Managed Switches no dot1x supplicant timeout auth-periodUse this command to set the auth-period value to t

Switching Commands95 ProSafe M4100 and M7100 Managed Switchesrate kbps. For example, if the configured limit is 10%, this is converted to ~25000 pps,

Switching Commands96ProSafe M4100 and M7100 Managed Switches no storm-control broadcast levelThis command sets the broadcast storm recovery threshold

Switching Commands97 ProSafe M4100 and M7100 Managed Switchesstorm-control broadcast level (Global)This command configures the broadcast storm recover

Switching Commands98ProSafe M4100 and M7100 Managed Switches storm-control multicastThis command enables multicast storm recovery mode for an interfac

Switching Commands99 ProSafe M4100 and M7100 Managed Switchesthe traffic is dropped. Therefore, the rate of multicast traffic is limited to the config