Netgear WPN824EXT- Instrukcja Użytkownika Pobierz pdf (Strona 36)

RangeMax WiFi Range Extender WPN824EXT User Manual

3-4 Setup and Maintenance

v1.0, April 2008

This screen shows the following settings:

Table 3-1. Wireless Range Extender Status Fields

Field Description

Firmware Version This is the version of the current software the extender is using. This will

change if you upgrade your extender.

Hardware Version This is the version of the physical device.

IP Settings

These are the current settings that you configured in the Basic Settings

screen.

MAC Address The Media Access Control address, the physical address, being used by

the Internet (WAN) port of the extender.

IP Address The IP address being used by the Internet port of the extender. The

default IP address of the extender is 192.168.1.250. If no address is

shown, or is 0.0.0.0, the extender cannot connect to the Internet.

IP Subnet Mask The IP subnet mask being used by the Internet (WAN) port of the

extender. For an explanation of subnet masks and subnet addressing,

click the link to the online document “TCP/IP Networking Basics” in

Appendix B.

Default Gateway The assigned default gateway address (the local network address) that

the extender is connected to. If it is assigned dynamically, and no Internet

connection exists, this is blank or 0.0.0.0.

Domain Name Server The Domain Name Server addresses being used by the extender. A

Domain Name Server translates human language URLs, such as http://

www.netgear.com, into IP addresses.

DHCP Client If disabled, the extender is configured to use a fixed IP address.

If enabled, the extender is configured to obtain an IP address

dynamically.

Wireless Settings

These are the current settings that you configured in the Wireless

Settings screen.

Wireless Network Name

(SSID)

The wireless network name (SSID) being used by the wireless port of the

extender. The default is NETGEAR_EXT.

Country/Region The geographic region where the extender being used. It might be illegal

to use the wireless features of the extender in some parts of the world.

Channel Identifies the channel of the wireless port being used. Click the link to the

online document “Wireless Networking Basics” in Appendix B for the

frequencies used on each channel.

Operation Mode Indicates the extender communication mode: 802.11g and 802.11b,

802.11g only, 802.11b only, 108 Mbps only, or Auto 108 Mbps.

Security Options This is the security type you configured.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 63 64

Komentarze do niniejszej Instrukcji

Brak uwag

Netgear WPN824EXT- Instrukcja Użytkownika Strona 36

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Routery Netgear WPN824EXT-