Netgear XSM7224S Instrukcja Użytkownika Strona 167

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 579
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 166
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Switching Commands 3-126
v1.0, November 2010
no ip verify binding
Use this command to remove the IPSG static entry from the IPSG database.
ip dhcp snooping limit
Use this command to control the rate at which the DHCP Snooping messages come. The default
rate is 15 pps with a range from 0 to 30 pps. The default burst level is 1 second with a range of 1 to
15 seconds.
no ip dhcp snooping limit
Use this command to set the rate at which the DHCP Snooping messages come, and the burst level,
to the defaults.
Format ip verify binding <mac-address> vlan <vlan id> <ip address> interface
<interface id>
Mode Global Config
Format no ip verify binding <mac-address> vlan <vlan id> <ip address>
interface <interface id>
Mode Global Config
Default 15 pps for rate limiting and 1 sec for burst interval
Format ip dhcp snooping limit {rate pps [burst interval seconds]}
Mode Interface Config
Format no ip dhcp snooping limit
Mode Interface Config
Przeglądanie stron 166
1 2 ... 162 163 164 165 166 167 168 169 170 171 172 ... 578 579

Komentarze do niniejszej Instrukcji

Brak uwag