Netgear WN2500RP Podręcznik Użytkownika Pobierz pdf (Strona 15)

Extender Network Settings

Universal Dual Band WiFi Range Extender WN2500RP

Use WPS to Join the Extender’s Wireless Network

WPS (Wi-Fi Protected Setup) lets you connect a computer or wireless device to the

extender’s network without entering the wireless network passphrase or key. Instead, you

use a WPS button or enter a PIN to connect. WPS supports WPA and WPA2 wireless

security.

Note: You cannot use the Push 'N' Connect WPS button to connect the

extender to your wireless network. The WPS button on the extender

can be used only to connect a computer to the extender.

The Universal Dual Band W

iFi Range Extender WN2500RP Installation Guide explains how

to use WPS during installation.

 To join the extender’s network using WPS:

1. Select Add WPS Client. The

following screen displays:

2. Select a radio button.

• Push Button (recommended). Either click the

button or press the WPS

button on the front of the extender.

• PIN Number. Select the radio button, and a PIN displays.

The extender tries to find the wireless client (the computer) that is attempting to join the

network. If you are using a WPS button, it tries for 2 minutes. If you are using a PIN, it

tries for 4 minutes.

3. Go to your wireless computer

. Use its WPS software to try to connect to the extender.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 35 36

Brak uwag

Netgear WN2500RP Podręcznik Użytkownika Strona 15