Netgear WG602V4 Instrukcja Użytkownika Pobierz pdf (Strona 34)

NETGEAR 54 Mbps Wireless Access Point WG602v4 Reference Manual

2-14 Installation and Configuration

v1.0, June 2007

• WPA2-PSK – WPA2 is a later version of WPA. Only select this if all clients support

WPA2. If selected, you must use AES encryption and a WPA passphrase (Network key).

See “Configuring WPA2-PSK Wireless Security” on page 2-18 for complete configuration

details.

• WPA-PSK and WPA2-PSK – This selection allows clients to use either WPA (with AES)

or WPA2 (with TKIP). If selected, encryption must be TKIP and AES; a WPA passphrase

(Network key) must also be entered. See “Configuring WPA-PSK/WPA2-PSK Wireless

Security” on page 2-18 for complete configuration details).

• Data Encryption: Select the desired option. The available options depend on the Network

Authentication setting above. The default is None. The supported options are:

– None – No encryption is used. This is the default.

– 64 bits WEP – Standard WEP encryption, using 40/64 bit encryption.

– 128 bits WEP – Standard WEP encryption, using 104/128 bit encryption.

– TKIP – This is the standard encryption method used with WPA.

– AES – This is the standard encryption method for WPA2. Some clients may support

AES with WPA, but this is not part of the 802.11 standards and is not supported by

this Access Point.

• WEP Security Encryption Key:

– Passphrase: To use the “passphrase” to generate the WEP keys, enter a passphrase

and click the “Generate Keys” button. You can also enter the keys directly. These keys

must match the other wireless stations.

– Key 1, Key 2, Key 3, Key 4: If using WEP, select the key to be used as the default

key. Data transmissions are always encrypted using the default key. The other keys

can only be used to decrypt received data.

• WPA Passphrase (Network Key): If using WPA-PSK, enter the passphrase here. All

wireless stations must use the same passphrase (network key). The network key must be

from 8 to 63 characters in length.

Note: All options are available if using Access Point mode. In other modes (e.g.,

Repeater, Bridge or Client) some options may be unavailable.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 77 78

Brak uwag

Netgear WG602V4 Instrukcja Użytkownika Strona 34