Netgear WNAP210 Instrukcja Użytkownika Pobierz pdf (Strona 57)

Advanced Configuration

ProSafe Wireless-N Access Point WNAP210

A computer on any LAN segment should be able to connect to the Internet or share files

and printers with computers or servers connected to any of the three WLAN segments.

8. Click Apply to save your settings.

You can extend repeating by adding up to two additional access points configured in repeater

mode. However, since repeater configurations communicate in half-duplex mode, the

bandwidth decreases as you add repeaters to the network.

Client Mode

In client mode the access point operates as a client bridge only and sends traffic to the

selected remote AP or peer device.

 To configure the access point for client mode:

1. Select Configuration > Wireless Bridge > Bridging and Repeating. The Bridging and

Repeating screen displays.

2. Select the Enable Wireless Bridging and Repeating check box. This allows you to select

a bridging mode.

3. Select Client. You can now enable the MAC clone feature. The default is Disable. If you

enable the MAC clone feature, enter the MAC clone address.

4. Click Apply.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 81 82

Brak uwag

Netgear WNAP210 Instrukcja Użytkownika Strona 57