Netgear WNAP210 Instrukcja Użytkownika Strona 96

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 126
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 95
Figure 4-7
ProSafe Wireless-N Access Point WNAP210 Reference Manual
4-12 Advanced Configuration
v1.0 March 2009
3. Configure the WNAP210 access point (AP2) on LAN Segment 2 in Point-to-Point Bridge
mode.
AP1 must have AP2’s MAC address in its Remote MAC Address field, and AP2 must have
AP1’
s MAC address in its Remote MAC Address field.
4. Configure
and verify the following parameters for both access points:
Verify that both access points are configured to operate
in the same LAN network address
range as the LAN devices.
Both use the same ESSID (Extended Service Set Identification), channel
, authentication
mode, if any, and security settings if security is in use.
Przeglądanie stron 95
1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 125 126

Komentarze do niniejszej Instrukcji

Brak uwag