Netgear XSM7224S Instrukcja Użytkownika Strona 468

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 579
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 467
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Management Commands 7-52
v1.0, November 2010
snmp-server enable traps linkmode
This command enables Link Up/Down traps for the entire switch. When enabled, link traps are
sent only if the Link Trap flag setting associated with the port is enabled. See “snmp trap link-
status” on page 7-55
no snmp-server enable traps linkmode
This command disables Link Up/Down traps for the entire switch.
snmp-server enable traps multiusers
This command enables Multiple User traps. When the traps are enabled, a Multiple User Trap is
sent when a user logs in to the terminal interface (EIA 232 or Telnet) and there is an existing
terminal interface session.
no snmp-server enable traps multiusers
This command disables Multiple User traps.
Note: This command may not be available on all platforms.
Default enabled
Format snmp-server enable traps linkmode
Mode Global Config
Format no snmp-server enable traps linkmode
Mode Global Config
Default enabled
Format snmp-server enable traps multiusers
Mode Global Config
Format no snmp-server enable traps multiusers
Mode Global Config
Przeglądanie stron 467
1 2 ... 463 464 465 466 467 468 469 470 471 472 473 ... 578 579

Komentarze do niniejszej Instrukcji

Brak uwag